AnsweredAssumed Answered

ERROR: Failed to configure ssl for kibana

Question asked by krishnachaitanyareddy on Dec 13, 2016
Latest reply on Feb 14, 2017 by krishnachaitanyareddy

I installed as mentioned in the link MapR Monitoring . It worked well in Sandbox, but when i tried same in my test cluster, i end up with below errors even though there is enough disk space and permissions. Is there any other way apart from below

Disk space 45566 MB

chmod -R 666 /opt/mapr/kibana

2015-10-09 14:45:48.449 host 1 configure.sh(40126) Install main:2029 Using 7222 port for CLDB host 1
2015-10-09 14:45:48.471 host 1 configure.sh(40126) Install main:2029 Using 7222 port for CLDB host 2
2015-10-09 14:45:48.492 host 1 configure.sh(40126) Install main:2029 Using 7222 port for CLDB host 3
2015-10-09 14:45:48.531 host 1 configure.sh(40126) Install main:2131 Using 5181 port for ZooKeeper host 1
2015-10-09 14:45:48.568 host 1 configure.sh(40126) Install main:2131 Using 5181 port for ZooKeeper host 2
2015-10-09 14:45:48.608 host 1 configure.sh(40126) Install main:2131 Using 5181 port for ZooKeeper host 3
2015-10-09 14:45:48.660 host 1 configure.sh(40126) Install CheckDiskSpace:332 Checking if Diskspace is on "/opt" is greater than 1024 MB
2015-10-09 14:45:48.671 host 1 configure.sh(40126) Install CheckDiskSpace:337 Diskspace on "/opt" is 45566 MB. Passed.
2015-10-09 14:45:48.686 host 1 configure.sh(40126) Install CheckDiskSpace:332 Checking if Diskspace is on "/tmp" is greater than 1024 MB
2015-10-09 14:45:48.697 host 1 configure.sh(40126) Install CheckDiskSpace:337 Diskspace on "/tmp" is 45566 MB. Passed.
2015-10-09 14:45:48.714 host 1 configure.sh(40126) Install CheckMem:388 Checking is system has at least 4096 MB of memory.
2015-10-09 14:45:48.725 host 1 configure.sh(40126) Install CheckMem:402 System has enough memory: 128894 MB
2015-10-09 14:45:48.736 host 1 configure.sh(40126) Install SetupDisksFile:293 Using disklist file /tmp/disk.list
2015-10-09 14:45:48.748 host 1 configure.sh(40126) Install CheckDiskFile:357 Checking if "/dev/sdc" exists
2015-10-09 14:45:49.110 host 1 configure.sh(40126) Install CheckDiskFile:357 Checking if "/dev/sdd" exists
2015-10-09 14:45:49.468 host 1 configure.sh(40126) Install CheckDiskFile:357 Checking if "/dev/sde" exists
2015-10-09 14:45:49.827 host 1 configure.sh(40126) Install CheckDiskFile:357 Checking if "/dev/sdf" exists
2015-10-09 14:45:50.192 host 1 configure.sh(40126) Install CheckDiskFile:357 Checking if "/dev/sdg" exists
2015-10-09 14:45:50.555 host 1 configure.sh(40126) Install CheckDiskFile:357 Checking if "/dev/sdh" exists
2015-10-09 14:45:50.923 host 1 configure.sh(40126) Install CheckDiskFile:357 Checking if "/dev/sdi" exists
2015-10-09 14:45:51.283 host 1 configure.sh(40126) Install CheckDiskFile:357 Checking if "/dev/sdj" exists
2015-10-09 14:45:51.646 host 1 configure.sh(40126) Install CheckDiskFile:357 Checking if "/dev/sdk" exists
2015-10-09 14:45:52.7 host 1 configure.sh(40126) Install CheckDiskFile:357 Checking if "/dev/sdl" exists
2015-10-09 14:45:52.373 host 1 configure.sh(40126) Install CheckDiskFile:357 Checking if "/dev/sdm" exists
2015-10-09 14:45:52.740 host 1 configure.sh(40126) Install CheckDiskFile:357 Checking if "/dev/sdn" exists
2015-10-09 14:45:53.103 host 1 configure.sh(40126) Install CheckDiskFile:377 All disks exist.
2015-10-09 14:45:53.116 host 1 configure.sh(40126) Install main:2239
2015-10-09 14:45:53.127 host 1 configure.sh(40126) Install main:2240 Node install STARTED
2015-10-09 14:45:53.139 host 1 configure.sh(40126) Install main:2241 -----------------------
2015-10-09 14:45:53.150 host 1 configure.sh(40126) Install main:2242 CMD: /opt/mapr/server/configure.sh -N cluster_name -Z host 1,host 2,host 3 -C host 1,host 2,host 3 -RM host 1,host 2 -HS host 1 -u maprdev -g maprdev -F /tmp/disk.list -disk-opts FW4
2015-10-09 14:45:53.162 host 1 configure.sh(40126) Install main:2265 Cluster run as secure=false
2015-10-09 14:45:53.181 host 1 configure.sh(40126) Install ConstructMapRClustersConfFile:720 Contructing ClusterConfFile: cldb node list: host 1:7222 host 2:7222 host 3:7222
2015-10-09 14:45:53.195 host 1 configure.sh(40126) Install ConstructMapRClustersConfFile:730 Adding "cluster_name secure=false host 1:7222 host 2:7222 host 3:7222" to "/opt/mapr/conf/mapr-clusters.conf"
2015-10-09 14:45:53.211 host 1 configure.sh(40126) Install ConstructMapRClustersConfFile:738 Contructing ClusterConfFile: Done
2015-10-09 14:45:53.222 host 1 configure.sh(40126) Install ConfigMaprUser:400 MAPR_USER: maprdev MAPR_GROUP: maprdev
2015-10-09 14:45:53.233 host 1 configure.sh(40126) Install ConfigMaprUser:401 CREATE_USER:
2015-10-09 14:45:53.244 host 1 configure.sh(40126) Install ConfigMaprUser:402 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2015-10-09 14:45:53.258 host 1 configure.sh(40126) Install ConfigMaprUser:474 Give privilleges to maprdev
2015-10-09 14:45:53.277 host 1 configure.sh(40126) Install ConfigureRunUserMaprDirs:251 Config MAPR_USER for logs/conf of MapR Services
chown: missing operand after `maprdev'
Try `chown --help' for more information.
chown: missing operand after `maprdev'
Try `chown --help' for more information.
chown: missing operand after `maprdev'
Try `chown --help' for more information.
chown: missing operand after `maprdev'
Try `chown --help' for more information.
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 14:45:53.350 host 1 configure.sh(40126) Install ConfigMaprUser:484 Update /opt/mapr/conf/daemon.conf
2015-10-09 14:45:53.371 host 1 configure.sh(40126) Install ConfigMaprUser:513 set maprdev limits in /etc/security/limits.conf
2015-10-09 14:45:53.562 host 1 configure.sh(40126) Install ConfigMaprUser:551 maprdev/maprdev user/group configured
2015-10-09 14:45:53.592 host 1 configure.sh(40126) Install ConfigureYarnServices:131 Multiple IPs/hostnames are provided for Resource Manager. Will configure high availability (HA) for Resource Manager..
chown: missing operand after `maprdev'
Try `chown --help' for more information.
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 14:45:56.732 host 1 configure.sh(40126) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-09 14:45:56.848 host 1 configure.sh(40126) Install ConfigureRunUserForZKRole:72 Config MAPR_USER for ZooKeeper Role
2015-10-09 14:45:56.879 host 1 configure.sh(40126) Install ConfigureCLDBRole:863 Adding: "mfs.cache.lru.sizes=inode:10:meta:10:dir:30:small:10:db:15:valc:3" to "/opt/mapr/conf/mfs.conf"
2015-10-09 14:45:56.889 host 1 configure.sh(40126) Install ConfigureCLDBRole:872 Adding: "#mfs.cache.lru.sizes=inode:3:meta:6:small:27:dir:6:db:20:valc:3" to "/opt/mapr/conf/mfs.conf"
2015-10-09 14:45:56.899 host 1 configure.sh(40126) Install ConfigureCLDBRole:881 Adding: "mfs.on.virtual.machine=0" to "/opt/mapr/conf/mfs.conf"
2015-10-09 14:45:57.16 host 1 configure.sh(40126) Install ConfigureWSRole:943 Configuring Webserver
2015-10-09 14:45:57.28 host 1 configure.sh(40126) Install GenerateSslKeys:792 Generating ssl keys
Certificate stored in file </tmp/tmpfile-mapcert.41495>
Certificate was added to keystore
2015-10-09 14:45:59.391 host 1 configure.sh(40126) Install GenerateSslKeys:804 SSL keys succefully generated
2015-10-09 14:45:59.408 host 1 configure.sh(40126) Install ConfigureJTRole:1077 Skipping Job Tracker Role configuration... Not found
2015-10-09 14:45:59.419 host 1 configure.sh(40126) Install ConfigureTTRole:1119 Skipping TaskTracker Role configuration... Not found
2015-10-09 14:45:59.431 host 1 configure.sh(40126) Install ConfigureDrillBitsRole:1134 Skipping Drill Bits Role configuration... Not found
2015-10-09 14:45:59.443 host 1 configure.sh(40126) Install ConfigureHBMRole:1233 Skipping Hbase Master Role configuration... Not found
2015-10-09 14:45:59.454 host 1 configure.sh(40126) Install ConfigureHBRRole:1264 Skipping Hbase RS Role configuration... Not found
2015-10-09 14:45:59.466 host 1 configure.sh(40126) Install ConfigureHBIRole:1248 Skipping Hbase Client Role configuration... Not found
2015-10-09 14:45:59.477 host 1 configure.sh(40126) Install ConfigureJMRole:481 Skipping Job Management Role configuration... Metrics not found
2015-10-09 14:45:59.489 host 1 configure.sh(40126) Install ConfigureOozieRole:1102 Skipping Oozie Role configuration... Not found
2015-10-09 14:45:59.515 host 1 configure.sh(40126) Install UpdateWardenConfig:1315 Updating Warden config
2015-10-09 14:45:59.588 host 1 configure.sh(40126) Install UpdateWardenConfig:1434 Adding "isDB=true" to "/opt/mapr/conf/warden.conf"
2015-10-09 14:45:59.618 host 1 configure.sh(40126) Install RunDiskSetup:304 Running disksetup: "/opt/mapr/server/disksetup -FW4 /tmp/disk.list"
2015-10-09 14:46:16.104 host 1 configure.sh(40126) Install StartCluster:163 Zookeeper started.
2015-10-09 14:46:19.777 host 1 configure.sh(40126) Install StartCluster:199 Warden started.
2015-10-09 14:46:19.789 host 1 configure.sh(40126) Install main:2325
2015-10-09 14:46:19.794 host 1 configure.sh(40126) Install main:2326 Node install FINISHED
2015-10-09 14:46:19.799 host 1 configure.sh(40126) Install main:2327 -----------------------
2015-10-09 15:24:01.149 host 1 configure.sh(45759) Install main:2029 Using 7222 port for CLDB secure=false
2015-10-09 15:24:01.323 host 1 configure.sh(45759) Install main:2239
2015-10-09 15:24:01.335 host 1 configure.sh(45759) Install main:2240 Node install STARTED
2015-10-09 15:24:01.347 host 1 configure.sh(45759) Install main:2241 -----------------------
2015-10-09 15:24:01.360 host 1 configure.sh(45759) Install main:2242 CMD: /opt/mapr/server/configure.sh -R
2015-10-09 15:24:01.381 host 1 configure.sh(45759) Install main:2265 Cluster run as secure=false
2015-10-09 15:24:01.399 host 1 configure.sh(45759) Install ConfigMaprUser:400 MAPR_USER: maprdev MAPR_GROUP: maprdev
2015-10-09 15:24:01.412 host 1 configure.sh(45759) Install ConfigMaprUser:401 CREATE_USER:
2015-10-09 15:24:01.424 host 1 configure.sh(45759) Install ConfigMaprUser:402 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2015-10-09 15:24:01.442 host 1 configure.sh(45759) Install ConfigMaprUser:474 Give privilleges to maprdev
2015-10-09 15:24:01.463 host 1 configure.sh(45759) Install ConfigureRunUserMaprDirs:251 Config MAPR_USER for logs/conf of MapR Services
2015-10-09 15:24:01.555 host 1 configure.sh(45759) Install ConfigMaprUser:484 Update /opt/mapr/conf/daemon.conf
2015-10-09 15:24:01.579 host 1 configure.sh(45759) Install ConfigMaprUser:513 set maprdev limits in /etc/security/limits.conf
2015-10-09 15:24:01.875 host 1 configure.sh(45759) Install ConfigMaprUser:551 maprdev/maprdev user/group configured
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 15:24:01.939 host 1 configure.sh(45759) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-09 15:24:02.90 host 1 configure.sh(45759) Install ConfigureRunUserForZKRole:72 Config MAPR_USER for ZooKeeper Role
2015-10-09 15:24:02.228 host 1 configure.sh(45759) Install ConfigureWSRole:943 Configuring Webserver
2015-10-09 15:24:02.246 host 1 configure.sh(45759) Install ConfigureJTRole:1077 Skipping Job Tracker Role configuration... Not found
2015-10-09 15:24:02.259 host 1 configure.sh(45759) Install ConfigureTTRole:1119 Skipping TaskTracker Role configuration... Not found
2015-10-09 15:24:02.272 host 1 configure.sh(45759) Install ConfigureDrillBitsRole:1134 Skipping Drill Bits Role configuration... Not found
2015-10-09 15:24:02.285 host 1 configure.sh(45759) Install ConfigureHBMRole:1233 Skipping Hbase Master Role configuration... Not found
2015-10-09 15:24:02.297 host 1 configure.sh(45759) Install ConfigureHBRRole:1264 Skipping Hbase RS Role configuration... Not found
2015-10-09 15:24:02.310 host 1 configure.sh(45759) Install ConfigureHBIRole:1248 Skipping Hbase Client Role configuration... Not found
2015-10-09 15:24:02.323 host 1 configure.sh(45759) Install ConfigureJMRole:481 Skipping Job Management Role configuration... Metrics not found
2015-10-09 15:24:02.336 host 1 configure.sh(45759) Install ConfigureOozieRole:1102 Skipping Oozie Role configuration... Not found
2015-10-09 15:24:02.365 host 1 configure.sh(45759) Install UpdateWardenConfig:1315 Updating Warden config
2015-10-09 15:24:02.467 host 1 configure.sh(45759) Install RunDiskSetup:312 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2015-10-09 15:24:02.480 host 1 configure.sh(45759) Install main:2325
2015-10-09 15:24:02.492 host 1 configure.sh(45759) Install main:2326 Node install FINISHED
2015-10-09 15:24:02.505 host 1 configure.sh(45759) Install main:2327 -----------------------
2015-10-09 15:25:51.476 host 1 configure.sh(15416) Install main:2029 Using 7222 port for CLDB secure=false
2015-10-09 15:25:51.651 host 1 configure.sh(15416) Install main:2239
2015-10-09 15:25:51.664 host 1 configure.sh(15416) Install main:2240 Node install STARTED
2015-10-09 15:25:51.676 host 1 configure.sh(15416) Install main:2241 -----------------------
2015-10-09 15:25:51.688 host 1 configure.sh(15416) Install main:2242 CMD: /opt/mapr/server/configure.sh -R
2015-10-09 15:25:51.710 host 1 configure.sh(15416) Install main:2265 Cluster run as secure=false
2015-10-09 15:25:51.729 host 1 configure.sh(15416) Install ConfigMaprUser:400 MAPR_USER: maprdev MAPR_GROUP: maprdev
2015-10-09 15:25:51.741 host 1 configure.sh(15416) Install ConfigMaprUser:401 CREATE_USER:
2015-10-09 15:25:51.753 host 1 configure.sh(15416) Install ConfigMaprUser:402 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2015-10-09 15:25:51.772 host 1 configure.sh(15416) Install ConfigMaprUser:474 Give privilleges to maprdev
2015-10-09 15:25:51.793 host 1 configure.sh(15416) Install ConfigureRunUserMaprDirs:251 Config MAPR_USER for logs/conf of MapR Services
2015-10-09 15:25:51.876 host 1 configure.sh(15416) Install ConfigMaprUser:484 Update /opt/mapr/conf/daemon.conf
2015-10-09 15:25:51.900 host 1 configure.sh(15416) Install ConfigMaprUser:513 set maprdev limits in /etc/security/limits.conf
2015-10-09 15:25:52.206 host 1 configure.sh(15416) Install ConfigMaprUser:551 maprdev/maprdev user/group configured
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 15:25:52.273 host 1 configure.sh(15416) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-09 15:25:52.421 host 1 configure.sh(15416) Install ConfigureRunUserForZKRole:72 Config MAPR_USER for ZooKeeper Role
2015-10-09 15:25:52.563 host 1 configure.sh(15416) Install ConfigureWSRole:943 Configuring Webserver
2015-10-09 15:25:52.582 host 1 configure.sh(15416) Install ConfigureJTRole:1077 Skipping Job Tracker Role configuration... Not found
2015-10-09 15:25:52.595 host 1 configure.sh(15416) Install ConfigureTTRole:1119 Skipping TaskTracker Role configuration... Not found
2015-10-09 15:25:52.608 host 1 configure.sh(15416) Install ConfigureDrillBitsRole:1134 Skipping Drill Bits Role configuration... Not found
2015-10-09 15:25:52.621 host 1 configure.sh(15416) Install ConfigureHBMRole:1233 Skipping Hbase Master Role configuration... Not found
2015-10-09 15:25:52.634 host 1 configure.sh(15416) Install ConfigureHBRRole:1264 Skipping Hbase RS Role configuration... Not found
2015-10-09 15:25:52.647 host 1 configure.sh(15416) Install ConfigureHBIRole:1248 Skipping Hbase Client Role configuration... Not found
2015-10-09 15:25:52.659 host 1 configure.sh(15416) Install ConfigureJMRole:481 Skipping Job Management Role configuration... Metrics not found
2015-10-09 15:25:52.673 host 1 configure.sh(15416) Install ConfigureOozieRole:1102 Skipping Oozie Role configuration... Not found
2015-10-09 15:25:52.702 host 1 configure.sh(15416) Install UpdateWardenConfig:1315 Updating Warden config
2015-10-09 15:25:52.808 host 1 configure.sh(15416) Install RunDiskSetup:312 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2015-10-09 15:25:52.822 host 1 configure.sh(15416) Install main:2325
2015-10-09 15:25:52.835 host 1 configure.sh(15416) Install main:2326 Node install FINISHED
2015-10-09 15:25:52.848 host 1 configure.sh(15416) Install main:2327 -----------------------
2015-10-09 16:10:20.632 host 1 configure.sh(37924) Install main:2029 Using 7222 port for CLDB secure=false
2015-10-09 16:10:20.789 host 1 configure.sh(37924) Install main:2239
2015-10-09 16:10:20.800 host 1 configure.sh(37924) Install main:2240 Node install STARTED
2015-10-09 16:10:20.811 host 1 configure.sh(37924) Install main:2241 -----------------------
2015-10-09 16:10:20.822 host 1 configure.sh(37924) Install main:2242 CMD: /opt/mapr/server/configure.sh -R
2015-10-09 16:10:20.842 host 1 configure.sh(37924) Install main:2265 Cluster run as secure=false
2015-10-09 16:10:20.859 host 1 configure.sh(37924) Install ConfigMaprUser:400 MAPR_USER: maprdev MAPR_GROUP: maprdev
2015-10-09 16:10:20.869 host 1 configure.sh(37924) Install ConfigMaprUser:401 CREATE_USER:
2015-10-09 16:10:20.880 host 1 configure.sh(37924) Install ConfigMaprUser:402 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2015-10-09 16:10:20.897 host 1 configure.sh(37924) Install ConfigMaprUser:474 Give privilleges to maprdev
2015-10-09 16:10:20.915 host 1 configure.sh(37924) Install ConfigureRunUserMaprDirs:251 Config MAPR_USER for logs/conf of MapR Services
2015-10-09 16:10:20.989 host 1 configure.sh(37924) Install ConfigMaprUser:484 Update /opt/mapr/conf/daemon.conf
2015-10-09 16:10:21.10 host 1 configure.sh(37924) Install ConfigMaprUser:513 set maprdev limits in /etc/security/limits.conf
2015-10-09 16:10:21.302 host 1 configure.sh(37924) Install ConfigMaprUser:551 maprdev/maprdev user/group configured
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 16:10:21.361 host 1 configure.sh(37924) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-09 16:10:21.496 host 1 configure.sh(37924) Install ConfigureRunUserForZKRole:72 Config MAPR_USER for ZooKeeper Role
2015-10-09 16:10:21.625 host 1 configure.sh(37924) Install ConfigureWSRole:943 Configuring Webserver
2015-10-09 16:10:21.642 host 1 configure.sh(37924) Install ConfigureJTRole:1077 Skipping Job Tracker Role configuration... Not found
2015-10-09 16:10:21.654 host 1 configure.sh(37924) Install ConfigureTTRole:1119 Skipping TaskTracker Role configuration... Not found
2015-10-09 16:10:21.665 host 1 configure.sh(37924) Install ConfigureDrillBitsRole:1134 Skipping Drill Bits Role configuration... Not found
2015-10-09 16:10:21.676 host 1 configure.sh(37924) Install ConfigureHBMRole:1233 Skipping Hbase Master Role configuration... Not found
2015-10-09 16:10:21.688 host 1 configure.sh(37924) Install ConfigureHBRRole:1267 Configuring Hbase RS Role
2015-10-09 16:10:21.699 host 1 configure.sh(37924) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 16:10:21.768 host 1 configure.sh(37924) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-09 16:10:21.788 host 1 configure.sh(37924) Install ConfigureHBIRole:1251 Configuring Hbase Client Role
2015-10-09 16:10:21.799 host 1 configure.sh(37924) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 16:10:21.868 host 1 configure.sh(37924) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-09 16:10:21.887 host 1 configure.sh(37924) Install ConfigureJMRole:481 Skipping Job Management Role configuration... Metrics not found
2015-10-09 16:10:21.899 host 1 configure.sh(37924) Install ConfigureOozieRole:1102 Skipping Oozie Role configuration... Not found
2015-10-09 16:10:21.925 host 1 configure.sh(37924) Install UpdateWardenConfig:1315 Updating Warden config
2015-10-09 16:10:22.23 host 1 configure.sh(37924) Install RunDiskSetup:312 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2015-10-09 16:10:22.35 host 1 configure.sh(37924) Install main:2325
2015-10-09 16:10:22.46 host 1 configure.sh(37924) Install main:2326 Node install FINISHED
2015-10-09 16:10:22.57 host 1 configure.sh(37924) Install main:2327 -----------------------
2015-10-09 16:20:15.82 host 1 configure.sh(38629) Install main:2029 Using 7222 port for CLDB secure=false
2015-10-09 16:20:15.245 host 1 configure.sh(38629) Install main:2239
2015-10-09 16:20:15.256 host 1 configure.sh(38629) Install main:2240 Node install STARTED
2015-10-09 16:20:15.267 host 1 configure.sh(38629) Install main:2241 -----------------------
2015-10-09 16:20:15.278 host 1 configure.sh(38629) Install main:2242 CMD: /opt/mapr/server/configure.sh -R
2015-10-09 16:20:15.298 host 1 configure.sh(38629) Install main:2265 Cluster run as secure=false
2015-10-09 16:20:15.315 host 1 configure.sh(38629) Install ConfigMaprUser:400 MAPR_USER: maprdev MAPR_GROUP: maprdev
2015-10-09 16:20:15.325 host 1 configure.sh(38629) Install ConfigMaprUser:401 CREATE_USER:
2015-10-09 16:20:15.336 host 1 configure.sh(38629) Install ConfigMaprUser:402 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2015-10-09 16:20:15.353 host 1 configure.sh(38629) Install ConfigMaprUser:474 Give privilleges to maprdev
2015-10-09 16:20:15.371 host 1 configure.sh(38629) Install ConfigureRunUserMaprDirs:251 Config MAPR_USER for logs/conf of MapR Services
2015-10-09 16:20:15.446 host 1 configure.sh(38629) Install ConfigMaprUser:484 Update /opt/mapr/conf/daemon.conf
2015-10-09 16:20:15.468 host 1 configure.sh(38629) Install ConfigMaprUser:513 set maprdev limits in /etc/security/limits.conf
2015-10-09 16:20:15.753 host 1 configure.sh(38629) Install ConfigMaprUser:551 maprdev/maprdev user/group configured
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 16:20:15.813 host 1 configure.sh(38629) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-09 16:20:15.948 host 1 configure.sh(38629) Install ConfigureRunUserForZKRole:72 Config MAPR_USER for ZooKeeper Role
2015-10-09 16:20:16.78 host 1 configure.sh(38629) Install ConfigureWSRole:943 Configuring Webserver
2015-10-09 16:20:16.100 host 1 configure.sh(38629) Install ConfigureJTRole:1077 Skipping Job Tracker Role configuration... Not found
2015-10-09 16:20:16.112 host 1 configure.sh(38629) Install ConfigureTTRole:1119 Skipping TaskTracker Role configuration... Not found
2015-10-09 16:20:16.123 host 1 configure.sh(38629) Install ConfigureDrillBitsRole:1134 Skipping Drill Bits Role configuration... Not found
2015-10-09 16:20:16.135 host 1 configure.sh(38629) Install ConfigureHBMRole:1233 Skipping Hbase Master Role configuration... Not found
2015-10-09 16:20:16.146 host 1 configure.sh(38629) Install ConfigureHBRRole:1267 Configuring Hbase RS Role
2015-10-09 16:20:16.157 host 1 configure.sh(38629) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 16:20:16.228 host 1 configure.sh(38629) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-09 16:20:16.248 host 1 configure.sh(38629) Install ConfigureHBIRole:1251 Configuring Hbase Client Role
2015-10-09 16:20:16.259 host 1 configure.sh(38629) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 16:20:16.328 host 1 configure.sh(38629) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-09 16:20:16.348 host 1 configure.sh(38629) Install ConfigureJMRole:481 Skipping Job Management Role configuration... Metrics not found
2015-10-09 16:20:16.360 host 1 configure.sh(38629) Install ConfigureOozieRole:1102 Skipping Oozie Role configuration... Not found
2015-10-09 16:20:16.386 host 1 configure.sh(38629) Install UpdateWardenConfig:1315 Updating Warden config
2015-10-09 16:20:16.491 host 1 configure.sh(38629) Install RunDiskSetup:312 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2015-10-09 16:20:16.502 host 1 configure.sh(38629) Install main:2325
2015-10-09 16:20:16.514 host 1 configure.sh(38629) Install main:2326 Node install FINISHED
2015-10-09 16:20:16.525 host 1 configure.sh(38629) Install main:2327 -----------------------
2015-10-09 17:10:34.308 host 1 configure.sh(15853) Install main:2029 Using 7222 port for CLDB secure=false
2015-10-09 17:10:34.468 host 1 configure.sh(15853) Install main:2239
2015-10-09 17:10:34.479 host 1 configure.sh(15853) Install main:2240 Node install STARTED
2015-10-09 17:10:34.490 host 1 configure.sh(15853) Install main:2241 -----------------------
2015-10-09 17:10:34.501 host 1 configure.sh(15853) Install main:2242 CMD: /opt/mapr/server/configure.sh -R
2015-10-09 17:10:34.521 host 1 configure.sh(15853) Install main:2265 Cluster run as secure=false
2015-10-09 17:10:34.537 host 1 configure.sh(15853) Install ConfigMaprUser:400 MAPR_USER: maprdev MAPR_GROUP: maprdev
2015-10-09 17:10:34.548 host 1 configure.sh(15853) Install ConfigMaprUser:401 CREATE_USER:
2015-10-09 17:10:34.559 host 1 configure.sh(15853) Install ConfigMaprUser:402 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2015-10-09 17:10:34.575 host 1 configure.sh(15853) Install ConfigMaprUser:474 Give privilleges to maprdev
2015-10-09 17:10:34.594 host 1 configure.sh(15853) Install ConfigureRunUserMaprDirs:251 Config MAPR_USER for logs/conf of MapR Services
2015-10-09 17:10:34.670 host 1 configure.sh(15853) Install ConfigMaprUser:484 Update /opt/mapr/conf/daemon.conf
2015-10-09 17:10:34.691 host 1 configure.sh(15853) Install ConfigMaprUser:513 set maprdev limits in /etc/security/limits.conf
2015-10-09 17:10:34.986 host 1 configure.sh(15853) Install ConfigMaprUser:551 maprdev/maprdev user/group configured
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 17:10:35.47 host 1 configure.sh(15853) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-09 17:10:35.180 host 1 configure.sh(15853) Install ConfigureRunUserForZKRole:72 Config MAPR_USER for ZooKeeper Role
2015-10-09 17:10:35.310 host 1 configure.sh(15853) Install ConfigureWSRole:943 Configuring Webserver
2015-10-09 17:10:35.327 host 1 configure.sh(15853) Install ConfigureJTRole:1077 Skipping Job Tracker Role configuration... Not found
2015-10-09 17:10:35.339 host 1 configure.sh(15853) Install ConfigureTTRole:1119 Skipping TaskTracker Role configuration... Not found
2015-10-09 17:10:35.350 host 1 configure.sh(15853) Install ConfigureDrillBitsRole:1134 Skipping Drill Bits Role configuration... Not found
2015-10-09 17:10:35.362 host 1 configure.sh(15853) Install ConfigureHBMRole:1233 Skipping Hbase Master Role configuration... Not found
2015-10-09 17:10:35.373 host 1 configure.sh(15853) Install ConfigureHBRRole:1267 Configuring Hbase RS Role
2015-10-09 17:10:35.385 host 1 configure.sh(15853) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 17:10:35.456 host 1 configure.sh(15853) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-09 17:10:35.475 host 1 configure.sh(15853) Install ConfigureHBIRole:1251 Configuring Hbase Client Role
2015-10-09 17:10:35.487 host 1 configure.sh(15853) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 17:10:35.557 host 1 configure.sh(15853) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-09 17:10:35.576 host 1 configure.sh(15853) Install ConfigureJMRole:481 Skipping Job Management Role configuration... Metrics not found
2015-10-09 17:10:35.588 host 1 configure.sh(15853) Install ConfigureOozieRole:1102 Skipping Oozie Role configuration... Not found
2015-10-09 17:10:35.613 host 1 configure.sh(15853) Install UpdateWardenConfig:1315 Updating Warden config
2015-10-09 17:10:35.710 host 1 configure.sh(15853) Install RunDiskSetup:312 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2015-10-09 17:10:35.722 host 1 configure.sh(15853) Install main:2325
2015-10-09 17:10:35.733 host 1 configure.sh(15853) Install main:2326 Node install FINISHED
2015-10-09 17:10:35.744 host 1 configure.sh(15853) Install main:2327 -----------------------
2015-10-09 17:30:23.550 host 1 configure.sh(27639) Install main:2029 Using 7222 port for CLDB secure=false
2015-10-09 17:30:23.710 host 1 configure.sh(27639) Install main:2239
2015-10-09 17:30:23.721 host 1 configure.sh(27639) Install main:2240 Node install STARTED
2015-10-09 17:30:23.732 host 1 configure.sh(27639) Install main:2241 -----------------------
2015-10-09 17:30:23.743 host 1 configure.sh(27639) Install main:2242 CMD: /opt/mapr/server/configure.sh -R
2015-10-09 17:30:23.763 host 1 configure.sh(27639) Install main:2265 Cluster run as secure=false
2015-10-09 17:30:23.780 host 1 configure.sh(27639) Install ConfigMaprUser:400 MAPR_USER: maprdev MAPR_GROUP: maprdev
2015-10-09 17:30:23.791 host 1 configure.sh(27639) Install ConfigMaprUser:401 CREATE_USER:
2015-10-09 17:30:23.801 host 1 configure.sh(27639) Install ConfigMaprUser:402 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2015-10-09 17:30:23.818 host 1 configure.sh(27639) Install ConfigMaprUser:474 Give privilleges to maprdev
2015-10-09 17:30:23.837 host 1 configure.sh(27639) Install ConfigureRunUserMaprDirs:251 Config MAPR_USER for logs/conf of MapR Services
2015-10-09 17:30:23.915 host 1 configure.sh(27639) Install ConfigMaprUser:484 Update /opt/mapr/conf/daemon.conf
2015-10-09 17:30:23.936 host 1 configure.sh(27639) Install ConfigMaprUser:513 set maprdev limits in /etc/security/limits.conf
2015-10-09 17:30:24.237 host 1 configure.sh(27639) Install ConfigMaprUser:551 maprdev/maprdev user/group configured
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 17:30:24.299 host 1 configure.sh(27639) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-09 17:30:24.435 host 1 configure.sh(27639) Install ConfigureRunUserForZKRole:72 Config MAPR_USER for ZooKeeper Role
2015-10-09 17:30:24.564 host 1 configure.sh(27639) Install ConfigureWSRole:943 Configuring Webserver
2015-10-09 17:30:24.580 host 1 configure.sh(27639) Install ConfigureJTRole:1077 Skipping Job Tracker Role configuration... Not found
2015-10-09 17:30:24.592 host 1 configure.sh(27639) Install ConfigureTTRole:1119 Skipping TaskTracker Role configuration... Not found
2015-10-09 17:30:24.604 host 1 configure.sh(27639) Install ConfigureDrillBitsRole:1134 Skipping Drill Bits Role configuration... Not found
2015-10-09 17:30:24.616 host 1 configure.sh(27639) Install ConfigureHBMRole:1233 Skipping Hbase Master Role configuration... Not found
2015-10-09 17:30:24.627 host 1 configure.sh(27639) Install ConfigureHBRRole:1267 Configuring Hbase RS Role
2015-10-09 17:30:24.638 host 1 configure.sh(27639) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 17:30:24.709 host 1 configure.sh(27639) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-09 17:30:24.729 host 1 configure.sh(27639) Install ConfigureHBIRole:1251 Configuring Hbase Client Role
2015-10-09 17:30:24.740 host 1 configure.sh(27639) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-09 17:30:24.811 host 1 configure.sh(27639) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-09 17:30:24.830 host 1 configure.sh(27639) Install ConfigureJMRole:481 Skipping Job Management Role configuration... Metrics not found
2015-10-09 17:30:24.842 host 1 configure.sh(27639) Install ConfigureOozieRole:1102 Skipping Oozie Role configuration... Not found
2015-10-09 17:30:24.868 host 1 configure.sh(27639) Install UpdateWardenConfig:1315 Updating Warden config
2015-10-09 17:30:24.966 host 1 configure.sh(27639) Install RunDiskSetup:312 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2015-10-09 17:30:24.977 host 1 configure.sh(27639) Install main:2325
2015-10-09 17:30:24.989 host 1 configure.sh(27639) Install main:2326 Node install FINISHED
2015-10-09 17:30:25.0 host 1 configure.sh(27639) Install main:2327 -----------------------
2015-10-12 08:51:41.546 host 1 configure.sh(2644) Install main:2029 Using 7222 port for CLDB secure=false
2015-10-12 08:51:41.705 host 1 configure.sh(2644) Install main:2239
2015-10-12 08:51:41.716 host 1 configure.sh(2644) Install main:2240 Node install STARTED
2015-10-12 08:51:41.727 host 1 configure.sh(2644) Install main:2241 -----------------------
2015-10-12 08:51:41.737 host 1 configure.sh(2644) Install main:2242 CMD: /opt/mapr/server/configure.sh -R
2015-10-12 08:51:41.757 host 1 configure.sh(2644) Install main:2265 Cluster run as secure=false
2015-10-12 08:51:41.774 host 1 configure.sh(2644) Install ConfigMaprUser:400 MAPR_USER: maprdev MAPR_GROUP: maprdev
2015-10-12 08:51:41.784 host 1 configure.sh(2644) Install ConfigMaprUser:401 CREATE_USER:
2015-10-12 08:51:41.795 host 1 configure.sh(2644) Install ConfigMaprUser:402 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2015-10-12 08:51:41.812 host 1 configure.sh(2644) Install ConfigMaprUser:474 Give privilleges to maprdev
2015-10-12 08:51:41.830 host 1 configure.sh(2644) Install ConfigureRunUserMaprDirs:251 Config MAPR_USER for logs/conf of MapR Services
2015-10-12 08:51:41.914 host 1 configure.sh(2644) Install ConfigMaprUser:484 Update /opt/mapr/conf/daemon.conf
2015-10-12 08:51:41.935 host 1 configure.sh(2644) Install ConfigMaprUser:513 set maprdev limits in /etc/security/limits.conf
2015-10-12 08:51:42.242 host 1 configure.sh(2644) Install ConfigMaprUser:551 maprdev/maprdev user/group configured
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-12 08:51:42.302 host 1 configure.sh(2644) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-12 08:51:42.436 host 1 configure.sh(2644) Install ConfigureRunUserForZKRole:72 Config MAPR_USER for ZooKeeper Role
2015-10-12 08:51:42.574 host 1 configure.sh(2644) Install ConfigureWSRole:943 Configuring Webserver
2015-10-12 08:51:42.591 host 1 configure.sh(2644) Install ConfigureJTRole:1077 Skipping Job Tracker Role configuration... Not found
2015-10-12 08:51:42.603 host 1 configure.sh(2644) Install ConfigureTTRole:1119 Skipping TaskTracker Role configuration... Not found
2015-10-12 08:51:42.614 host 1 configure.sh(2644) Install ConfigureDrillBitsRole:1134 Skipping Drill Bits Role configuration... Not found
2015-10-12 08:51:42.626 host 1 configure.sh(2644) Install ConfigureHBMRole:1233 Skipping Hbase Master Role configuration... Not found
2015-10-12 08:51:42.637 host 1 configure.sh(2644) Install ConfigureHBRRole:1267 Configuring Hbase RS Role
2015-10-12 08:51:42.649 host 1 configure.sh(2644) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-12 08:51:42.719 host 1 configure.sh(2644) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-12 08:51:42.738 host 1 configure.sh(2644) Install ConfigureHBIRole:1251 Configuring Hbase Client Role
2015-10-12 08:51:42.750 host 1 configure.sh(2644) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-12 08:51:42.819 host 1 configure.sh(2644) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-12 08:51:42.838 host 1 configure.sh(2644) Install ConfigureJMRole:481 Skipping Job Management Role configuration... Metrics not found
2015-10-12 08:51:42.850 host 1 configure.sh(2644) Install ConfigureOozieRole:1102 Skipping Oozie Role configuration... Not found
2015-10-12 08:51:42.875 host 1 configure.sh(2644) Install UpdateWardenConfig:1315 Updating Warden config
2015-10-12 08:51:42.970 host 1 configure.sh(2644) Install RunDiskSetup:312 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2015-10-12 08:51:42.981 host 1 configure.sh(2644) Install main:2325
2015-10-12 08:51:42.993 host 1 configure.sh(2644) Install main:2326 Node install FINISHED
2015-10-12 08:51:43.4 host 1 configure.sh(2644) Install main:2327 -----------------------
2015-10-12 10:30:31.24 host 1 configure.sh(46268) Install main:2029 Using 7222 port for CLDB secure=false
2015-10-12 10:30:31.183 host 1 configure.sh(46268) Install main:2239
2015-10-12 10:30:31.194 host 1 configure.sh(46268) Install main:2240 Node install STARTED
2015-10-12 10:30:31.205 host 1 configure.sh(46268) Install main:2241 -----------------------
2015-10-12 10:30:31.216 host 1 configure.sh(46268) Install main:2242 CMD: /opt/mapr/server/configure.sh -R
2015-10-12 10:30:31.236 host 1 configure.sh(46268) Install main:2265 Cluster run as secure=false
2015-10-12 10:30:31.252 host 1 configure.sh(46268) Install ConfigMaprUser:400 MAPR_USER: maprdev MAPR_GROUP: maprdev
2015-10-12 10:30:31.263 host 1 configure.sh(46268) Install ConfigMaprUser:401 CREATE_USER:
2015-10-12 10:30:31.274 host 1 configure.sh(46268) Install ConfigMaprUser:402 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2015-10-12 10:30:31.290 host 1 configure.sh(46268) Install ConfigMaprUser:474 Give privilleges to maprdev
2015-10-12 10:30:31.308 host 1 configure.sh(46268) Install ConfigureRunUserMaprDirs:251 Config MAPR_USER for logs/conf of MapR Services
2015-10-12 10:30:31.389 host 1 configure.sh(46268) Install ConfigMaprUser:484 Update /opt/mapr/conf/daemon.conf
2015-10-12 10:30:31.410 host 1 configure.sh(46268) Install ConfigMaprUser:513 set maprdev limits in /etc/security/limits.conf
2015-10-12 10:30:31.727 host 1 configure.sh(46268) Install ConfigMaprUser:551 maprdev/maprdev user/group configured
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-12 10:30:31.787 host 1 configure.sh(46268) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-12 10:30:31.919 host 1 configure.sh(46268) Install ConfigureRunUserForZKRole:72 Config MAPR_USER for ZooKeeper Role
2015-10-12 10:30:32.56 host 1 configure.sh(46268) Install ConfigureWSRole:943 Configuring Webserver
2015-10-12 10:30:32.73 host 1 configure.sh(46268) Install ConfigureJTRole:1077 Skipping Job Tracker Role configuration... Not found
2015-10-12 10:30:32.85 host 1 configure.sh(46268) Install ConfigureTTRole:1119 Skipping TaskTracker Role configuration... Not found
2015-10-12 10:30:32.97 host 1 configure.sh(46268) Install ConfigureDrillBitsRole:1137 Configuring Drill Bits Role
2015-10-12 10:30:32.121 host 1 configure.sh(46268) Install ConfigureHBMRole:1233 Skipping Hbase Master Role configuration... Not found
2015-10-12 10:30:32.132 host 1 configure.sh(46268) Install ConfigureHBRRole:1267 Configuring Hbase RS Role
2015-10-12 10:30:32.144 host 1 configure.sh(46268) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-12 10:30:32.215 host 1 configure.sh(46268) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-12 10:30:32.236 host 1 configure.sh(46268) Install ConfigureHBIRole:1251 Configuring Hbase Client Role
2015-10-12 10:30:32.247 host 1 configure.sh(46268) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-12 10:30:32.317 host 1 configure.sh(46268) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-12 10:30:32.336 host 1 configure.sh(46268) Install ConfigureJMRole:481 Skipping Job Management Role configuration... Metrics not found
2015-10-12 10:30:32.347 host 1 configure.sh(46268) Install ConfigureOozieRole:1102 Skipping Oozie Role configuration... Not found
2015-10-12 10:30:32.373 host 1 configure.sh(46268) Install UpdateWardenConfig:1315 Updating Warden config
2015-10-12 10:30:32.469 host 1 configure.sh(46268) Install RunDiskSetup:312 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2015-10-12 10:30:32.480 host 1 configure.sh(46268) Install main:2325
2015-10-12 10:30:32.492 host 1 configure.sh(46268) Install main:2326 Node install FINISHED
2015-10-12 10:30:32.503 host 1 configure.sh(46268) Install main:2327 -----------------------
2015-10-12 11:13:01.786 host 1 configure.sh(21621) Install main:2029 Using 7222 port for CLDB secure=false
2015-10-12 11:13:01.957 host 1 configure.sh(21621) Install main:2239
2015-10-12 11:13:01.969 host 1 configure.sh(21621) Install main:2240 Node install STARTED
2015-10-12 11:13:01.981 host 1 configure.sh(21621) Install main:2241 -----------------------
2015-10-12 11:13:01.993 host 1 configure.sh(21621) Install main:2242 CMD: /opt/mapr/server/configure.sh -R
2015-10-12 11:13:02.15 host 1 configure.sh(21621) Install main:2265 Cluster run as secure=false
2015-10-12 11:13:02.33 host 1 configure.sh(21621) Install ConfigMaprUser:400 MAPR_USER: maprdev MAPR_GROUP: maprdev
2015-10-12 11:13:02.45 host 1 configure.sh(21621) Install ConfigMaprUser:401 CREATE_USER:
2015-10-12 11:13:02.57 host 1 configure.sh(21621) Install ConfigMaprUser:402 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2015-10-12 11:13:02.75 host 1 configure.sh(21621) Install ConfigMaprUser:474 Give privilleges to maprdev
2015-10-12 11:13:02.95 host 1 configure.sh(21621) Install ConfigureRunUserMaprDirs:251 Config MAPR_USER for logs/conf of MapR Services
2015-10-12 11:13:02.187 host 1 configure.sh(21621) Install ConfigMaprUser:484 Update /opt/mapr/conf/daemon.conf
2015-10-12 11:13:02.210 host 1 configure.sh(21621) Install ConfigMaprUser:513 set maprdev limits in /etc/security/limits.conf
2015-10-12 11:13:02.593 host 1 configure.sh(21621) Install ConfigMaprUser:551 maprdev/maprdev user/group configured
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-12 11:13:16.360 host 1 configure.sh(21621) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-12 11:13:16.494 host 1 configure.sh(21621) Install ConfigureRunUserForZKRole:72 Config MAPR_USER for ZooKeeper Role
2015-10-12 11:13:16.633 host 1 configure.sh(21621) Install ConfigureWSRole:943 Configuring Webserver
2015-10-12 11:13:16.651 host 1 configure.sh(21621) Install ConfigureJTRole:1077 Skipping Job Tracker Role configuration... Not found
2015-10-12 11:13:16.663 host 1 configure.sh(21621) Install ConfigureTTRole:1119 Skipping TaskTracker Role configuration... Not found
2015-10-12 11:13:16.676 host 1 configure.sh(21621) Install ConfigureDrillBitsRole:1137 Configuring Drill Bits Role
2015-10-12 11:13:16.706 host 1 configure.sh(21621) Install ConfigureHBMRole:1233 Skipping Hbase Master Role configuration... Not found
2015-10-12 11:13:16.718 host 1 configure.sh(21621) Install ConfigureHBRRole:1267 Configuring Hbase RS Role
2015-10-12 11:13:16.730 host 1 configure.sh(21621) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-12 11:13:29.891 host 1 configure.sh(21621) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-12 11:13:29.907 host 1 configure.sh(21621) Install ConfigureHBIRole:1251 Configuring Hbase Client Role
2015-10-12 11:13:29.916 host 1 configure.sh(21621) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-12 11:13:43.836 host 1 configure.sh(21621) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-12 11:13:43.852 host 1 configure.sh(21621) Install ConfigureJMRole:481 Skipping Job Management Role configuration... Metrics not found
2015-10-12 11:13:43.866 host 1 configure.sh(21621) Install ConfigureOozieRole:1113 Configuring Oozie role
2015-10-12 11:13:43.917 host 1 configure.sh(21621) Install UpdateWardenConfig:1315 Updating Warden config
2015-10-12 11:13:43.982 host 1 configure.sh(21621) Install RunDiskSetup:312 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2015-10-12 11:13:43.991 host 1 configure.sh(21621) Install main:2325
2015-10-12 11:13:44.0 host 1 configure.sh(21621) Install main:2326 Node install FINISHED
2015-10-12 11:13:44.8 host 1 configure.sh(21621) Install main:2327 -----------------------
2015-10-12 12:52:42.249 host 1 configure.sh(36729) Install main:2029 Using 7222 port for CLDB host 1
2015-10-12 12:52:42.272 host 1 configure.sh(36729) Install main:2029 Using 7222 port for CLDB host 2
2015-10-12 12:52:42.295 host 1 configure.sh(36729) Install main:2029 Using 7222 port for CLDB host 3
2015-10-12 12:52:42.338 host 1 configure.sh(36729) Install main:2131 Using 5181 port for ZooKeeper host 1
2015-10-12 12:52:42.373 host 1 configure.sh(36729) Install main:2131 Using 5181 port for ZooKeeper host 2
2015-10-12 12:52:42.415 host 1 configure.sh(36729) Install main:2131 Using 5181 port for ZooKeeper host 3
2015-10-12 12:52:42.470 host 1 configure.sh(36729) Install CheckDiskSpace:332 Checking if Diskspace is on "/opt" is greater than 1024 MB
2015-10-12 12:52:42.482 host 1 configure.sh(36729) Install CheckDiskSpace:337 Diskspace on "/opt" is 53043 MB. Passed.
2015-10-12 12:52:42.499 host 1 configure.sh(36729) Install CheckDiskSpace:332 Checking if Diskspace is on "/tmp" is greater than 1024 MB
2015-10-12 12:52:42.511 host 1 configure.sh(36729) Install CheckDiskSpace:337 Diskspace on "/tmp" is 53043 MB. Passed.
2015-10-12 12:52:42.529 host 1 configure.sh(36729) Install CheckMem:388 Checking is system has at least 4096 MB of memory.
2015-10-12 12:52:42.541 host 1 configure.sh(36729) Install CheckMem:402 System has enough memory: 128894 MB
2015-10-12 12:52:42.554 host 1 configure.sh(36729) Install main:2239
2015-10-12 12:52:42.567 host 1 configure.sh(36729) Install main:2240 Node install STARTED
2015-10-12 12:52:42.579 host 1 configure.sh(36729) Install main:2241 -----------------------
2015-10-12 12:52:42.591 host 1 configure.sh(36729) Install main:2242 CMD: /opt/mapr/server/configure.sh -secure -genkeys -Z host 1,host 2,host 3 -C host 1,host 2,host 3 -N cluster_name
2015-10-12 12:52:42.604 host 1 configure.sh(36729) Install main:2265 Cluster run as secure=true
2015-10-12 12:52:42.627 host 1 configure.sh(36729) Install ConstructMapRClustersConfFile:720 Contructing ClusterConfFile: cldb node list: host 1:7222 host 2:7222 host 3:7222
2015-10-12 12:52:42.649 host 1 configure.sh(36729) Install ConstructMapRClustersConfFile:738 Contructing ClusterConfFile: Done
2015-10-12 12:52:42.668 host 1 configure.sh(36729) Install ConfigMaprUser:400 MAPR_USER: maprdev MAPR_GROUP: maprdev
2015-10-12 12:52:42.680 host 1 configure.sh(36729) Install ConfigMaprUser:401 CREATE_USER:
2015-10-12 12:52:42.691 host 1 configure.sh(36729) Install ConfigMaprUser:402 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2015-10-12 12:52:42.710 host 1 configure.sh(36729) Install ConfigMaprUser:474 Give privilleges to maprdev
2015-10-12 12:52:42.730 host 1 configure.sh(36729) Install ConfigureRunUserMaprDirs:251 Config MAPR_USER for logs/conf of MapR Services
2015-10-12 12:52:42.819 host 1 configure.sh(36729) Install ConfigMaprUser:484 Update /opt/mapr/conf/daemon.conf
2015-10-12 12:52:42.843 host 1 configure.sh(36729) Install ConfigMaprUser:513 set maprdev limits in /etc/security/limits.conf
2015-10-12 12:52:43.588 host 1 configure.sh(36729) Install ConfigMaprUser:551 maprdev/maprdev user/group configured
2015-10-12 12:52:43.620 host 1 configure.sh(36729) Install ConfigureYarnServices:126 No RM addresses were provided. Will configure MapR HA for Resource Manager..
2015-10-12 12:52:43.642 host 1 configure.sh(36729) Install ConfigureYarnSiteXml:53 Backing up "/opt/mapr/hadoop/hadoop-2.5.1/etc/hadoop/yarn-site.xml" to "/opt/mapr/hadoop/hadoop-2.5.1/etc/hadoop/yarn-site-2015-10-12.12-52.xml"
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-12 12:53:00.234 host 1 configure.sh(36729) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-12 12:53:00.345 host 1 configure.sh(36729) Install ConfigureRunUserForZKRole:72 Config MAPR_USER for ZooKeeper Role
2015-10-12 12:53:00.364 host 1 configure.sh(36729) Install GenerateCldbKey:742 Generating cldb key
2015-10-12 12:53:04.142 host 1 configure.sh(36729) Install ConfigureCLDBRole:818 cldb key /opt/mapr/conf/cldb.key is succefully generated
2015-10-12 12:53:04.154 host 1 configure.sh(36729) Install GenerateServerTicket:754 Generating server ticket
2015-10-12 12:53:07.878 host 1 configure.sh(36729) Install ConfigureCLDBRole:824 server ticket /opt/mapr/conf/maprserverticket is succefully generated
2015-10-12 12:53:07.891 host 1 configure.sh(36729) Install GenerateSslKeys:792 Generating ssl keys
2015-10-12 12:53:07.920 host 1 configure.sh(36729) Install GenerateSslKeys:792 ERROR: could not generate ssl keys
2015-10-12 12:54:59.887 host 1 configure.sh(39964) Install main:2029 Using 7222 port for CLDB host 1
2015-10-12 12:54:59.910 host 1 configure.sh(39964) Install main:2029 Using 7222 port for CLDB host 2
2015-10-12 12:54:59.933 host 1 configure.sh(39964) Install main:2029 Using 7222 port for CLDB host 3
2015-10-12 12:54:59.975 host 1 configure.sh(39964) Install main:2131 Using 5181 port for ZooKeeper host 1
2015-10-12 12:55:00.11 host 1 configure.sh(39964) Install main:2131 Using 5181 port for ZooKeeper host 2
2015-10-12 12:55:00.52 host 1 configure.sh(39964) Install main:2131 Using 5181 port for ZooKeeper host 3
2015-10-12 12:55:00.107 host 1 configure.sh(39964) Install CheckDiskSpace:332 Checking if Diskspace is on "/opt" is greater than 1024 MB
2015-10-12 12:55:00.119 host 1 configure.sh(39964) Install CheckDiskSpace:337 Diskspace on "/opt" is 52968 MB. Passed.
2015-10-12 12:55:00.135 host 1 configure.sh(39964) Install CheckDiskSpace:332 Checking if Diskspace is on "/tmp" is greater than 1024 MB
2015-10-12 12:55:00.148 host 1 configure.sh(39964) Install CheckDiskSpace:337 Diskspace on "/tmp" is 52968 MB. Passed.
2015-10-12 12:55:00.167 host 1 configure.sh(39964) Install CheckMem:388 Checking is system has at least 4096 MB of memory.
2015-10-12 12:55:00.179 host 1 configure.sh(39964) Install CheckMem:402 System has enough memory: 128894 MB
2015-10-12 12:55:00.191 host 1 configure.sh(39964) Install main:2239
2015-10-12 12:55:00.203 host 1 configure.sh(39964) Install main:2240 Node install STARTED
2015-10-12 12:55:00.215 host 1 configure.sh(39964) Install main:2241 -----------------------
2015-10-12 12:55:00.228 host 1 configure.sh(39964) Install main:2242 CMD: /opt/mapr/server/configure.sh -secure -genkeys -Z host 1,host 2,host 3 -C host 1,host 2,host 3 -N cluster_name
2015-10-12 12:55:00.241 host 1 configure.sh(39964) Install main:2265 Cluster run as secure=true
2015-10-12 12:55:00.263 host 1 configure.sh(39964) Install ConstructMapRClustersConfFile:720 Contructing ClusterConfFile: cldb node list: host 1:7222 host 2:7222 host 3:7222
2015-10-12 12:55:00.286 host 1 configure.sh(39964) Install ConstructMapRClustersConfFile:738 Contructing ClusterConfFile: Done
2015-10-12 12:55:00.304 host 1 configure.sh(39964) Install ConfigMaprUser:400 MAPR_USER: maprdev MAPR_GROUP: maprdev
2015-10-12 12:55:00.316 host 1 configure.sh(39964) Install ConfigMaprUser:401 CREATE_USER:
2015-10-12 12:55:00.328 host 1 configure.sh(39964) Install ConfigMaprUser:402 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2015-10-12 12:55:00.347 host 1 configure.sh(39964) Install ConfigMaprUser:474 Give privilleges to maprdev
2015-10-12 12:55:00.367 host 1 configure.sh(39964) Install ConfigureRunUserMaprDirs:251 Config MAPR_USER for logs/conf of MapR Services
2015-10-12 12:55:00.458 host 1 configure.sh(39964) Install ConfigMaprUser:484 Update /opt/mapr/conf/daemon.conf
2015-10-12 12:55:00.482 host 1 configure.sh(39964) Install ConfigMaprUser:513 set maprdev limits in /etc/security/limits.conf
2015-10-12 12:55:01.196 host 1 configure.sh(39964) Install ConfigMaprUser:551 maprdev/maprdev user/group configured
2015-10-12 12:55:01.226 host 1 configure.sh(39964) Install ConfigureYarnServices:126 No RM addresses were provided. Will configure MapR HA for Resource Manager..
2015-10-12 12:55:01.246 host 1 configure.sh(39964) Install ConfigureYarnSiteXml:53 Backing up "/opt/mapr/hadoop/hadoop-2.5.1/etc/hadoop/yarn-site.xml" to "/opt/mapr/hadoop/hadoop-2.5.1/etc/hadoop/yarn-site-2015-10-12.12-55.xml"
2015-10-12 12:55:03.868 host 1 configure.sh(39964) Install ConfigureYarnSiteXml:53 ERROR: cldb key file '/opt/mapr/conf/cldb.key' is already available.
2015-10-12 12:58:12.345 host 1 configure.sh(41191) Install main:2029 Using 7222 port for CLDB host 1
2015-10-12 12:58:12.368 host 1 configure.sh(41191) Install main:2029 Using 7222 port for CLDB host 2
2015-10-12 12:58:12.391 host 1 configure.sh(41191) Install main:2029 Using 7222 port for CLDB host 3
2015-10-12 12:58:12.433 host 1 configure.sh(41191) Install main:2131 Using 5181 port for ZooKeeper host 1
2015-10-12 12:58:12.469 host 1 configure.sh(41191) Install main:2131 Using 5181 port for ZooKeeper host 2
2015-10-12 12:58:12.511 host 1 configure.sh(41191) Install main:2131 Using 5181 port for ZooKeeper host 3
2015-10-12 12:58:12.566 host 1 configure.sh(41191) Install CheckDiskSpace:332 Checking if Diskspace is on "/opt" is greater than 1024 MB
2015-10-12 12:58:12.578 host 1 configure.sh(41191) Install CheckDiskSpace:337 Diskspace on "/opt" is 52968 MB. Passed.
2015-10-12 12:58:12.595 host 1 configure.sh(41191) Install CheckDiskSpace:332 Checking if Diskspace is on "/tmp" is greater than 1024 MB
2015-10-12 12:58:12.607 host 1 configure.sh(41191) Install CheckDiskSpace:337 Diskspace on "/tmp" is 52968 MB. Passed.
2015-10-12 12:58:12.626 host 1 configure.sh(41191) Install CheckMem:388 Checking is system has at least 4096 MB of memory.
2015-10-12 12:58:12.638 host 1 configure.sh(41191) Install CheckMem:402 System has enough memory: 128894 MB
2015-10-12 12:58:12.651 host 1 configure.sh(41191) Install main:2239
2015-10-12 12:58:12.663 host 1 configure.sh(41191) Install main:2240 Node install STARTED
2015-10-12 12:58:12.675 host 1 configure.sh(41191) Install main:2241 -----------------------
2015-10-12 12:58:12.687 host 1 configure.sh(41191) Install main:2242 CMD: /opt/mapr/server/configure.sh -secure -genkeys -Z host 1,host 2,host 3 -C host 1,host 2,host 3 -N cluster_name
2015-10-12 12:58:12.700 host 1 configure.sh(41191) Install main:2265 Cluster run as secure=true
2015-10-12 12:58:12.723 host 1 configure.sh(41191) Install ConstructMapRClustersConfFile:720 Contructing ClusterConfFile: cldb node list: host 1:7222 host 2:7222 host 3:7222
2015-10-12 12:58:12.746 host 1 configure.sh(41191) Install ConstructMapRClustersConfFile:738 Contructing ClusterConfFile: Done
2015-10-12 12:58:12.764 host 1 configure.sh(41191) Install ConfigMaprUser:400 MAPR_USER: maprdev MAPR_GROUP: maprdev
2015-10-12 12:58:12.776 host 1 configure.sh(41191) Install ConfigMaprUser:401 CREATE_USER:
2015-10-12 12:58:12.787 host 1 configure.sh(41191) Install ConfigMaprUser:402 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2015-10-12 12:58:12.806 host 1 configure.sh(41191) Install ConfigMaprUser:474 Give privilleges to maprdev
2015-10-12 12:58:12.827 host 1 configure.sh(41191) Install ConfigureRunUserMaprDirs:251 Config MAPR_USER for logs/conf of MapR Services
2015-10-12 12:58:12.917 host 1 configure.sh(41191) Install ConfigMaprUser:484 Update /opt/mapr/conf/daemon.conf
2015-10-12 12:58:12.942 host 1 configure.sh(41191) Install ConfigMaprUser:513 set maprdev limits in /etc/security/limits.conf
2015-10-12 12:58:13.689 host 1 configure.sh(41191) Install ConfigMaprUser:551 maprdev/maprdev user/group configured
2015-10-12 12:58:13.721 host 1 configure.sh(41191) Install ConfigureYarnServices:126 No RM addresses were provided. Will configure MapR HA for Resource Manager..
2015-10-12 12:58:13.743 host 1 configure.sh(41191) Install ConfigureYarnSiteXml:53 Backing up "/opt/mapr/hadoop/hadoop-2.5.1/etc/hadoop/yarn-site.xml" to "/opt/mapr/hadoop/hadoop-2.5.1/etc/hadoop/yarn-site-2015-10-12.12-58.xml"
2015-10-12 12:58:16.588 host 1 configure.sh(41191) Install ConfigureYarnSiteXml:53 ERROR: server ticket file '/opt/mapr/conf/maprserverticket' is already available.
2015-10-12 12:58:30.305 host 1 configure.sh(42381) Install main:2029 Using 7222 port for CLDB host 1
2015-10-12 12:58:30.328 host 1 configure.sh(42381) Install main:2029 Using 7222 port for CLDB host 2
2015-10-12 12:58:30.350 host 1 configure.sh(42381) Install main:2029 Using 7222 port for CLDB host 3
2015-10-12 12:58:30.392 host 1 configure.sh(42381) Install main:2131 Using 5181 port for ZooKeeper host 1
2015-10-12 12:58:30.428 host 1 configure.sh(42381) Install main:2131 Using 5181 port for ZooKeeper host 2
2015-10-12 12:58:30.469 host 1 configure.sh(42381) Install main:2131 Using 5181 port for ZooKeeper host 3
2015-10-12 12:58:30.520 host 1 configure.sh(42381) Install CheckDiskSpace:332 Checking if Diskspace is on "/opt" is greater than 1024 MB
2015-10-12 12:58:30.531 host 1 configure.sh(42381) Install CheckDiskSpace:337 Diskspace on "/opt" is 52968 MB. Passed.
2015-10-12 12:58:30.547 host 1 configure.sh(42381) Install CheckDiskSpace:332 Checking if Diskspace is on "/tmp" is greater than 1024 MB
2015-10-12 12:58:30.558 host 1 configure.sh(42381) Install CheckDiskSpace:337 Diskspace on "/tmp" is 52968 MB. Passed.
2015-10-12 12:58:30.575 host 1 configure.sh(42381) Install CheckMem:388 Checking is system has at least 4096 MB of memory.
2015-10-12 12:58:30.587 host 1 configure.sh(42381) Install CheckMem:402 System has enough memory: 128894 MB
2015-10-12 12:58:30.598 host 1 configure.sh(42381) Install main:2239
2015-10-12 12:58:30.610 host 1 configure.sh(42381) Install main:2240 Node install STARTED
2015-10-12 12:58:30.621 host 1 configure.sh(42381) Install main:2241 -----------------------
2015-10-12 12:58:30.634 host 1 configure.sh(42381) Install main:2242 CMD: /opt/mapr/server/configure.sh -secure -genkeys -Z host 1,host 2,host 3 -C host 1,host 2,host 3 -N cluster_name
2015-10-12 12:58:30.647 host 1 configure.sh(42381) Install main:2265 Cluster run as secure=true
2015-10-12 12:58:30.670 host 1 configure.sh(42381) Install ConstructMapRClustersConfFile:720 Contructing ClusterConfFile: cldb node list: host 1:7222 host 2:7222 host 3:7222
2015-10-12 12:58:30.692 host 1 configure.sh(42381) Install ConstructMapRClustersConfFile:738 Contructing ClusterConfFile: Done
2015-10-12 12:58:30.710 host 1 configure.sh(42381) Install ConfigMaprUser:400 MAPR_USER: maprdev MAPR_GROUP: maprdev
2015-10-12 12:58:30.722 host 1 configure.sh(42381) Install ConfigMaprUser:401 CREATE_USER:
2015-10-12 12:58:30.734 host 1 configure.sh(42381) Install ConfigMaprUser:402 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2015-10-12 12:58:30.752 host 1 configure.sh(42381) Install ConfigMaprUser:474 Give privilleges to maprdev
2015-10-12 12:58:30.772 host 1 configure.sh(42381) Install ConfigureRunUserMaprDirs:251 Config MAPR_USER for logs/conf of MapR Services
2015-10-12 12:58:30.862 host 1 configure.sh(42381) Install ConfigMaprUser:484 Update /opt/mapr/conf/daemon.conf
2015-10-12 12:58:30.886 host 1 configure.sh(42381) Install ConfigMaprUser:513 set maprdev limits in /etc/security/limits.conf
2015-10-12 12:58:31.608 host 1 configure.sh(42381) Install ConfigMaprUser:551 maprdev/maprdev user/group configured
2015-10-12 12:58:31.640 host 1 configure.sh(42381) Install ConfigureYarnServices:126 No RM addresses were provided. Will configure MapR HA for Resource Manager..
2015-10-12 12:58:31.661 host 1 configure.sh(42381) Install ConfigureYarnSiteXml:53 Backing up "/opt/mapr/hadoop/hadoop-2.5.1/etc/hadoop/yarn-site.xml" to "/opt/mapr/hadoop/hadoop-2.5.1/etc/hadoop/yarn-site-2015-10-12.12-58.xml"
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-12 12:58:48.687 host 1 configure.sh(42381) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-12 12:58:48.799 host 1 configure.sh(42381) Install ConfigureRunUserForZKRole:72 Config MAPR_USER for ZooKeeper Role
2015-10-12 12:58:48.818 host 1 configure.sh(42381) Install GenerateCldbKey:742 Generating cldb key
2015-10-12 12:58:52.609 host 1 configure.sh(42381) Install ConfigureCLDBRole:818 cldb key /opt/mapr/conf/cldb.key is succefully generated
2015-10-12 12:58:52.622 host 1 configure.sh(42381) Install GenerateServerTicket:754 Generating server ticket
2015-10-12 12:58:56.430 host 1 configure.sh(42381) Install ConfigureCLDBRole:824 server ticket /opt/mapr/conf/maprserverticket is succefully generated
2015-10-12 12:58:56.443 host 1 configure.sh(42381) Install GenerateSslKeys:792 Generating ssl keys
Certificate stored in file </tmp/tmpfile-mapcert.45586>
Certificate was added to keystore
2015-10-12 12:58:58.934 host 1 configure.sh(42381) Install GenerateSslKeys:804 SSL keys succefully generated
2015-10-12 12:58:59.65 host 1 configure.sh(42381) Install ConfigureWSRole:943 Configuring Webserver
2015-10-12 12:58:59.83 host 1 configure.sh(42381) Install ConfigureJTRole:1077 Skipping Job Tracker Role configuration... Not found
2015-10-12 12:58:59.96 host 1 configure.sh(42381) Install ConfigureTTRole:1119 Skipping TaskTracker Role configuration... Not found
2015-10-12 12:58:59.108 host 1 configure.sh(42381) Install ConfigureDrillBitsRole:1137 Configuring Drill Bits Role
2015-10-12 12:58:59.138 host 1 configure.sh(42381) Install ConfigureHBMRole:1233 Skipping Hbase Master Role configuration... Not found
2015-10-12 12:58:59.151 host 1 configure.sh(42381) Install ConfigureHBRRole:1267 Configuring Hbase RS Role
2015-10-12 12:58:59.163 host 1 configure.sh(42381) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-12 12:59:13.306 host 1 configure.sh(42381) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-12 12:59:13.321 host 1 configure.sh(42381) Install ConfigureHBIRole:1251 Configuring Hbase Client Role
2015-10-12 12:59:13.330 host 1 configure.sh(42381) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-10-12 12:59:27.294 host 1 configure.sh(42381) Install UpdateFileClientConfig:1045 Updating file client config
2015-10-12 12:59:27.309 host 1 configure.sh(42381) Install ConfigureJMRole:481 Skipping Job Management Role configuration... Metrics not found
2015-10-12 12:59:27.323 host 1 configure.sh(42381) Install ConfigureOozieRole:1113 Configuring Oozie role
2015-10-12 12:59:27.376 host 1 configure.sh(42381) Install UpdateWardenConfig:1315 Updating Warden config
2015-10-12 12:59:27.483 host 1 configure.sh(42381) Install RunDiskSetup:312 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2015-10-12 12:59:29.288 host 1 configure.sh(42381) Install StartCluster:163 Zookeeper started.
2015-10-12 12:59:37.41 host 1 configure.sh(42381) Install StartCluster:199 Warden started.
2015-10-12 12:59:37.68 host 1 configure.sh(42381) Install main:2325
2015-10-12 12:59:37.80 host 1 configure.sh(42381) Install main:2326 Node install FINISHED
2015-10-12 12:59:37.92 host 1 configure.sh(42381) Install main:2327 -----------------------
2015-11-11 11:16:15.859 host 1 configure.sh(46642) Install main:2029 Using 7222 port for CLDB secure=true
2015-11-11 11:16:16.40 host 1 configure.sh(46642) Install main:2239
2015-11-11 11:16:16.53 host 1 configure.sh(46642) Install main:2240 Node install STARTED
2015-11-11 11:16:16.65 host 1 configure.sh(46642) Install main:2241 -----------------------
2015-11-11 11:16:16.77 host 1 configure.sh(46642) Install main:2242 CMD: /opt/mapr/server/configure.sh -R
2015-11-11 11:16:16.99 host 1 configure.sh(46642) Install main:2265 Cluster run as secure=true
2015-11-11 11:16:16.118 host 1 configure.sh(46642) Install ConfigMaprUser:400 MAPR_USER: maprdev MAPR_GROUP: maprdev
2015-11-11 11:16:16.130 host 1 configure.sh(46642) Install ConfigMaprUser:401 CREATE_USER:
2015-11-11 11:16:16.142 host 1 configure.sh(46642) Install ConfigMaprUser:402 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2015-11-11 11:16:16.160 host 1 configure.sh(46642) Install ConfigMaprUser:474 Give privilleges to maprdev
2015-11-11 11:16:16.181 host 1 configure.sh(46642) Install ConfigureRunUserMaprDirs:251 Config MAPR_USER for logs/conf of MapR Services
2015-11-11 11:16:16.287 host 1 configure.sh(46642) Install ConfigMaprUser:484 Update /opt/mapr/conf/daemon.conf
2015-11-11 11:16:16.311 host 1 configure.sh(46642) Install ConfigMaprUser:513 set maprdev limits in /etc/security/limits.conf
2015-11-11 11:16:17.121 host 1 configure.sh(46642) Install ConfigMaprUser:551 maprdev/maprdev user/group configured
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-11-11 11:16:31.640 host 1 configure.sh(46642) Install UpdateFileClientConfig:1045 Updating file client config
2015-11-11 11:16:31.762 host 1 configure.sh(46642) Install ConfigureRunUserForZKRole:72 Config MAPR_USER for ZooKeeper Role
2015-11-11 11:16:31.905 host 1 configure.sh(46642) Install ConfigureWSRole:943 Configuring Webserver
2015-11-11 11:16:31.923 host 1 configure.sh(46642) Install ConfigureJTRole:1077 Skipping Job Tracker Role configuration... Not found
2015-11-11 11:16:31.936 host 1 configure.sh(46642) Install ConfigureTTRole:1119 Skipping TaskTracker Role configuration... Not found
2015-11-11 11:16:31.948 host 1 configure.sh(46642) Install ConfigureDrillBitsRole:1137 Configuring Drill Bits Role
2015-11-11 11:16:31.982 host 1 configure.sh(46642) Install ConfigureHBMRole:1233 Skipping Hbase Master Role configuration... Not found
2015-11-11 11:16:31.994 host 1 configure.sh(46642) Install ConfigureHBRRole:1267 Configuring Hbase RS Role
2015-11-11 11:16:32.7 host 1 configure.sh(46642) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-11-11 11:16:46.864 host 1 configure.sh(46642) Install UpdateFileClientConfig:1045 Updating file client config
2015-11-11 11:16:46.880 host 1 configure.sh(46642) Install ConfigureHBIRole:1251 Configuring Hbase Client Role
2015-11-11 11:16:46.889 host 1 configure.sh(46642) Install ConfigureHBase:1169 Configuring Hbase
chown: missing operand after `maprdev'
Try `chown --help' for more information.
2015-11-11 11:17:03.134 host 1 configure.sh(46642) Install UpdateFileClientConfig:1045 Updating file client config
2015-11-11 11:17:03.149 host 1 configure.sh(46642) Install ConfigureJMRole:481 Skipping Job Management Role configuration... Metrics not found
2015-11-11 11:17:03.163 host 1 configure.sh(46642) Install ConfigureOozieRole:1113 Configuring Oozie role
2015-11-11 11:17:03.225 host 1 configure.sh(46642) Install UpdateWardenConfig:1315 Updating Warden config
2015-11-11 11:17:03.334 host 1 configure.sh(46642) Install RunDiskSetup:312 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2015-11-11 11:17:03.347 host 1 configure.sh(46642) Install main:2325
2015-11-11 11:17:03.360 host 1 configure.sh(46642) Install main:2326 Node install FINISHED
2015-11-11 11:17:03.372 host 1 configure.sh(46642) Install main:2327 -----------------------
2016-06-20 11:21:44.69 host 1 configure.sh(9089) Install check_valid_ip_list:1968 Using 7222 port for CLDB secure=true
2016-06-20 11:21:44.252 host 1 configure.sh(9089) Install main:2842
2016-06-20 11:21:44.265 host 1 configure.sh(9089) Install main:2843 Node install STARTED
2016-06-20 11:21:44.277 host 1 configure.sh(9089) Install main:2844 -----------------------
2016-06-20 11:21:44.290 host 1 configure.sh(9089) Install main:2845 CMD: /opt/mapr/server/configure.sh -R
2016-06-20 11:21:44.325 host 1 configure.sh(9089) Install main:2883 Cluster run as secure=true
2016-06-20 11:21:44.348 host 1 configure.sh(9089) Install ConfigMaprUser:435 MAPR_USER: maprdev MAPR_GROUP: maprdev
2016-06-20 11:21:44.360 host 1 configure.sh(9089) Install ConfigMaprUser:436 CREATE_USER:
2016-06-20 11:21:44.372 host 1 configure.sh(9089) Install ConfigMaprUser:437 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2016-06-20 11:21:44.391 host 1 configure.sh(9089) Install ConfigMaprUser:511 Give privilleges to maprdev
2016-06-20 11:21:44.439 host 1 configure.sh(9089) Install ConfigureRunUserMaprDirs:269 Config MAPR_USER for logs/conf of MapR Services
2016-06-20 11:21:44.556 host 1 configure.sh(9089) Install ConfigMaprUser:529 Update /opt/mapr/conf/daemon.conf
2016-06-20 11:21:44.580 host 1 configure.sh(9089) Install ConfigMaprUser:558 set maprdev limits in /etc/security/limits.conf
2016-06-20 11:21:45.498 host 1 configure.sh(9089) Install ConfigMaprUser:604 maprdev/maprdev user/group configured
2016-06-20 11:22:01.8 host 1 configure.sh(9089) Install UpdateFileClientConfig:1260 Updating file client config
2016-06-20 11:22:01.81 host 1 configure.sh(9089) Install ConfigureRunUserForZKRole:88 Config MAPR_USER for ZooKeeper Role
2016-06-20 11:22:01.241 host 1 configure.sh(9089) Install ConfigureWSRole:1179 Configuring Webserver
2016-06-20 11:22:01.260 host 1 configure.sh(9089) Install ConfigureJTRole:1292 Skipping Job Tracker Role configuration... Not found
2016-06-20 11:22:01.274 host 1 configure.sh(9089) Install ConfigureTTRole:1371 Skipping TaskTracker Role configuration... Not found
2016-06-20 11:22:01.287 host 1 configure.sh(9089) Install ConfigureDrillBitsRole:1389 Configuring Drill Bits Role
2016-06-20 11:22:01.319 host 1 configure.sh(9089) Install ConfigureHBMRole:1488 Skipping Hbase Master Role configuration... Not found
2016-06-20 11:22:01.332 host 1 configure.sh(9089) Install ConfigureHBRRole:1524 Configuring Hbase RS Role
2016-06-20 11:22:01.345 host 1 configure.sh(9089) Install ConfigureHBase:1421 Configuring Hbase
2016-06-20 11:22:01.427 host 1 configure.sh(9089) Install UpdateFileClientConfig:1260 Updating file client config
2016-06-20 11:22:01.451 host 1 configure.sh(9089) Install ConfigureHBIRole:1507 Configuring Hbase Client Role
2016-06-20 11:22:01.464 host 1 configure.sh(9089) Install ConfigureHBase:1421 Configuring Hbase
2016-06-20 11:22:01.547 host 1 configure.sh(9089) Install UpdateFileClientConfig:1260 Updating file client config
2016-06-20 11:22:01.568 host 1 configure.sh(9089) Install UpdateFileClientConfig:1260 -defaultdb input is neither mapr nor hbase, will use the default value hbase
2016-06-20 11:22:01.587 host 1 configure.sh(9089) Install ConfigureDefaultDB:1553 mapr-hbase client is installed /opt/mapr/lib/mapr-hbase-4.1.0-mapr.jar
2016-06-20 11:22:01.607 host 1 configure.sh(9089) Install ConfigureDefaultDB:1581 add property mapr.hbase.default.db with value hbase
2016-06-20 11:22:01.690 host 1 configure.sh(9089) Install ConfigureOozieRole:1365 Configuring Oozie role
2016-06-20 11:22:01.785 host 1 configure.sh(9089) Install ConfigureMesosRoles:1318 Skipping Mesos Roles configuration... Not found
2016-06-20 11:22:01.799 host 1 configure.sh(9089) Install ConfigureMyriad:1310 Skipping Myriad Roles configuration... Not found
2016-06-20 11:22:01.830 host 1 configure.sh(9089) Install UpdateWardenConfig:1715 Updating Warden config
2016-06-20 11:22:01.977 host 1 configure.sh(9089) Install RunDiskSetup:453 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2016-06-20 11:22:01.994 host 1 configure.sh(9089) Install main:2952
2016-06-20 11:22:02.7 host 1 configure.sh(9089) Install main:2953 Node install FINISHED
2016-06-20 11:22:02.20 host 1 configure.sh(9089) Install main:2954 -----------------------
2016-06-20 11:23:00.582 host 1 configure.sh(12805) Install check_valid_ip_list:1968 Using 7222 port for CLDB secure=true
2016-06-20 11:23:00.743 host 1 configure.sh(12805) Install main:2842
2016-06-20 11:23:00.755 host 1 configure.sh(12805) Install main:2843 Node install STARTED
2016-06-20 11:23:00.766 host 1 configure.sh(12805) Install main:2844 -----------------------
2016-06-20 11:23:00.778 host 1 configure.sh(12805) Install main:2845 CMD: /opt/mapr/server/configure.sh -R
2016-06-20 11:23:00.809 host 1 configure.sh(12805) Install main:2883 Cluster run as secure=true
2016-06-20 11:23:00.830 host 1 configure.sh(12805) Install ConfigMaprUser:435 MAPR_USER: maprdev MAPR_GROUP: maprdev
2016-06-20 11:23:00.842 host 1 configure.sh(12805) Install ConfigMaprUser:436 CREATE_USER:
2016-06-20 11:23:00.853 host 1 configure.sh(12805) Install ConfigMaprUser:437 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2016-06-20 11:23:00.871 host 1 configure.sh(12805) Install ConfigMaprUser:511 Give privilleges to maprdev
2016-06-20 11:23:00.910 host 1 configure.sh(12805) Install ConfigureRunUserMaprDirs:269 Config MAPR_USER for logs/conf of MapR Services
2016-06-20 11:23:01.11 host 1 configure.sh(12805) Install ConfigMaprUser:529 Update /opt/mapr/conf/daemon.conf
2016-06-20 11:23:01.36 host 1 configure.sh(12805) Install ConfigMaprUser:558 set maprdev limits in /etc/security/limits.conf
2016-06-20 11:23:01.946 host 1 configure.sh(12805) Install ConfigMaprUser:604 maprdev/maprdev user/group configured
2016-06-20 11:23:06.87 host 1 configure.sh(12805) Install UpdateFileClientConfig:1260 Updating file client config
2016-06-20 11:23:06.230 host 1 configure.sh(12805) Install ConfigureRunUserForZKRole:88 Config MAPR_USER for ZooKeeper Role
2016-06-20 11:23:06.396 host 1 configure.sh(12805) Install ConfigureWSRole:1179 Configuring Webserver
2016-06-20 11:23:06.416 host 1 configure.sh(12805) Install ConfigureJTRole:1292 Skipping Job Tracker Role configuration... Not found
2016-06-20 11:23:06.429 host 1 configure.sh(12805) Install ConfigureTTRole:1371 Skipping TaskTracker Role configuration... Not found
2016-06-20 11:23:06.442 host 1 configure.sh(12805) Install ConfigureDrillBitsRole:1389 Configuring Drill Bits Role
2016-06-20 11:23:06.473 host 1 configure.sh(12805) Install ConfigureHBMRole:1488 Skipping Hbase Master Role configuration... Not found
2016-06-20 11:23:06.487 host 1 configure.sh(12805) Install ConfigureHBRRole:1524 Configuring Hbase RS Role
2016-06-20 11:23:06.500 host 1 configure.sh(12805) Install ConfigureHBase:1421 Configuring Hbase
2016-06-20 11:23:06.581 host 1 configure.sh(12805) Install UpdateFileClientConfig:1260 Updating file client config
2016-06-20 11:23:06.604 host 1 configure.sh(12805) Install ConfigureHBIRole:1507 Configuring Hbase Client Role
2016-06-20 11:23:06.618 host 1 configure.sh(12805) Install ConfigureHBase:1421 Configuring Hbase
2016-06-20 11:23:06.699 host 1 configure.sh(12805) Install UpdateFileClientConfig:1260 Updating file client config
2016-06-20 11:23:06.720 host 1 configure.sh(12805) Install UpdateFileClientConfig:1260 -defaultdb input is neither mapr nor hbase, will use the default value hbase
2016-06-20 11:23:06.738 host 1 configure.sh(12805) Install ConfigureDefaultDB:1553 mapr-hbase client is installed /opt/mapr/lib/mapr-hbase-5.1.0-mapr.jar
2016-06-20 11:23:06.757 host 1 configure.sh(12805) Install ConfigureDefaultDB:1576 set property mapr.hbase.default.db to value hbase
2016-06-20 11:23:06.814 host 1 configure.sh(12805) Install ConfigureOozieRole:1365 Configuring Oozie role
2016-06-20 11:23:06.904 host 1 configure.sh(12805) Install ConfigureMesosRoles:1318 Skipping Mesos Roles configuration... Not found
2016-06-20 11:23:06.918 host 1 configure.sh(12805) Install ConfigureMyriad:1310 Skipping Myriad Roles configuration... Not found
2016-06-20 11:23:06.948 host 1 configure.sh(12805) Install UpdateWardenConfig:1715 Updating Warden config
2016-06-20 11:23:07.86 host 1 configure.sh(12805) Install RunDiskSetup:453 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2016-06-20 11:23:07.103 host 1 configure.sh(12805) Install main:2952
2016-06-20 11:23:07.117 host 1 configure.sh(12805) Install main:2953 Node install FINISHED
2016-06-20 11:23:07.130 host 1 configure.sh(12805) Install main:2954 -----------------------
2016-06-20 11:24:29.24 host 1 configure.sh(16987) Install check_valid_ip_list:1968 Using 7222 port for CLDB secure=true
2016-06-20 11:24:29.194 host 1 configure.sh(16987) Install main:2842
2016-06-20 11:24:29.206 host 1 configure.sh(16987) Install main:2843 Node install STARTED
2016-06-20 11:24:29.219 host 1 configure.sh(16987) Install main:2844 -----------------------
2016-06-20 11:24:29.232 host 1 configure.sh(16987) Install main:2845 CMD: /opt/mapr/server/configure.sh -R
2016-06-20 11:24:29.266 host 1 configure.sh(16987) Install main:2883 Cluster run as secure=true
2016-06-20 11:24:29.288 host 1 configure.sh(16987) Install ConfigMaprUser:435 MAPR_USER: maprdev MAPR_GROUP: maprdev
2016-06-20 11:24:29.300 host 1 configure.sh(16987) Install ConfigMaprUser:436 CREATE_USER:
2016-06-20 11:24:29.312 host 1 configure.sh(16987) Install ConfigMaprUser:437 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2016-06-20 11:24:29.331 host 1 configure.sh(16987) Install ConfigMaprUser:511 Give privilleges to maprdev
2016-06-20 11:24:29.369 host 1 configure.sh(16987) Install ConfigureRunUserMaprDirs:269 Config MAPR_USER for logs/conf of MapR Services
2016-06-20 11:24:29.471 host 1 configure.sh(16987) Install ConfigMaprUser:529 Update /opt/mapr/conf/daemon.conf
2016-06-20 11:24:29.495 host 1 configure.sh(16987) Install ConfigMaprUser:558 set maprdev limits in /etc/security/limits.conf
2016-06-20 11:24:30.477 host 1 configure.sh(16987) Install ConfigMaprUser:604 maprdev/maprdev user/group configured
2016-06-20 11:24:39.278 host 1 configure.sh(16987) Install UpdateFileClientConfig:1260 Updating file client config
2016-06-20 11:24:39.389 host 1 configure.sh(16987) Install ConfigureRunUserForZKRole:88 Config MAPR_USER for ZooKeeper Role
2016-06-20 11:24:39.478 host 1 configure.sh(16987) Install ConfigureWSRole:1179 Configuring Webserver
2016-06-20 11:24:39.492 host 1 configure.sh(16987) Install ConfigureJTRole:1292 Skipping Job Tracker Role configuration... Not found
2016-06-20 11:24:39.501 host 1 configure.sh(16987) Install ConfigureTTRole:1371 Skipping TaskTracker Role configuration... Not found
2016-06-20 11:24:39.511 host 1 configure.sh(16987) Install ConfigureDrillBitsRole:1389 Configuring Drill Bits Role
2016-06-20 11:24:39.532 host 1 configure.sh(16987) Install ConfigureHBMRole:1488 Skipping Hbase Master Role configuration... Not found
2016-06-20 11:24:39.541 host 1 configure.sh(16987) Install ConfigureHBRRole:1524 Configuring Hbase RS Role
2016-06-20 11:24:39.549 host 1 configure.sh(16987) Install ConfigureHBase:1421 Configuring Hbase
2016-06-20 11:24:39.598 host 1 configure.sh(16987) Install UpdateFileClientConfig:1260 Updating file client config
2016-06-20 11:24:39.621 host 1 configure.sh(16987) Install ConfigureHBIRole:1507 Configuring Hbase Client Role
2016-06-20 11:24:39.634 host 1 configure.sh(16987) Install ConfigureHBase:1421 Configuring Hbase
2016-06-20 11:24:39.711 host 1 configure.sh(16987) Install UpdateFileClientConfig:1260 Updating file client config
2016-06-20 11:24:39.732 host 1 configure.sh(16987) Install UpdateFileClientConfig:1260 -defaultdb input is neither mapr nor hbase, will use the default value hbase
2016-06-20 11:24:39.751 host 1 configure.sh(16987) Install ConfigureDefaultDB:1553 mapr-hbase client is installed /opt/mapr/lib/mapr-hbase-5.1.0-mapr.jar
2016-06-20 11:24:39.771 host 1 configure.sh(16987) Install ConfigureDefaultDB:1576 set property mapr.hbase.default.db to value hbase
2016-06-20 11:24:39.829 host 1 configure.sh(16987) Install ConfigureOozieRole:1365 Configuring Oozie role
2016-06-20 11:24:39.920 host 1 configure.sh(16987) Install ConfigureMesosRoles:1318 Skipping Mesos Roles configuration... Not found
2016-06-20 11:24:39.934 host 1 configure.sh(16987) Install ConfigureMyriad:1310 Skipping Myriad Roles configuration... Not found
2016-06-20 11:24:39.965 host 1 configure.sh(16987) Install UpdateWardenConfig:1715 Updating Warden config
2016-06-20 11:24:40.102 host 1 configure.sh(16987) Install RunDiskSetup:453 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2016-06-20 11:24:40.119 host 1 configure.sh(16987) Install main:2952
2016-06-20 11:24:40.133 host 1 configure.sh(16987) Install main:2953 Node install FINISHED
2016-06-20 11:24:40.146 host 1 configure.sh(16987) Install main:2954 -----------------------
2016-06-20 11:32:48.861 host 1 configure.sh(27883) Install check_valid_ip_list:1968 Using 7222 port for CLDB secure=true
2016-06-20 11:32:49.28 host 1 configure.sh(27883) Install main:2842
2016-06-20 11:32:49.41 host 1 configure.sh(27883) Install main:2843 Node install STARTED
2016-06-20 11:32:49.54 host 1 configure.sh(27883) Install main:2844 -----------------------
2016-06-20 11:32:49.67 host 1 configure.sh(27883) Install main:2845 CMD: /opt/mapr/server/configure.sh -R
2016-06-20 11:32:49.101 host 1 configure.sh(27883) Install main:2883 Cluster run as secure=true
2016-06-20 11:32:49.118 host 1 configure.sh(27883) Install ConfigMaprUser:435 MAPR_USER: maprdev MAPR_GROUP: maprdev
2016-06-20 11:32:49.126 host 1 configure.sh(27883) Install ConfigMaprUser:436 CREATE_USER:
2016-06-20 11:32:49.134 host 1 configure.sh(27883) Install ConfigMaprUser:437 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2016-06-20 11:32:49.148 host 1 configure.sh(27883) Install ConfigMaprUser:511 Give privilleges to maprdev
2016-06-20 11:32:49.179 host 1 configure.sh(27883) Install ConfigureRunUserMaprDirs:269 Config MAPR_USER for logs/conf of MapR Services
2016-06-20 11:32:49.229 host 1 configure.sh(27883) Install ConfigMaprUser:529 Update /opt/mapr/conf/daemon.conf
2016-06-20 11:32:49.247 host 1 configure.sh(27883) Install ConfigMaprUser:558 set maprdev limits in /etc/security/limits.conf
2016-06-20 11:32:49.767 host 1 configure.sh(27883) Install ConfigMaprUser:604 maprdev/maprdev user/group configured
2016-06-20 11:32:49.812 host 1 configure.sh(27883) Install UpdateFileClientConfig:1260 Updating file client config
2016-06-20 11:32:49.927 host 1 configure.sh(27883) Install ConfigureRunUserForZKRole:88 Config MAPR_USER for ZooKeeper Role
2016-06-20 11:32:50.18 host 1 configure.sh(27883) Install ConfigureWSRole:1179 Configuring Webserver
2016-06-20 11:32:50.26 host 1 configure.sh(27883) Install ConfigureJTRole:1292 Skipping Job Tracker Role configuration... Not found
2016-06-20 11:32:50.32 host 1 configure.sh(27883) Install ConfigureTTRole:1371 Skipping TaskTracker Role configuration... Not found
2016-06-20 11:32:50.37 host 1 configure.sh(27883) Install ConfigureDrillBitsRole:1389 Configuring Drill Bits Role
2016-06-20 11:32:50.51 host 1 configure.sh(27883) Install ConfigureHBMRole:1488 Skipping Hbase Master Role configuration... Not found
2016-06-20 11:32:50.56 host 1 configure.sh(27883) Install ConfigureHBRRole:1524 Configuring Hbase RS Role
2016-06-20 11:32:50.61 host 1 configure.sh(27883) Install ConfigureHBase:1421 Configuring Hbase
2016-06-20 11:32:50.95 host 1 configure.sh(27883) Install UpdateFileClientConfig:1260 Updating file client config
2016-06-20 11:32:50.113 host 1 configure.sh(27883) Install ConfigureHBIRole:1507 Configuring Hbase Client Role
2016-06-20 11:32:50.125 host 1 configure.sh(27883) Install ConfigureHBase:1421 Configuring Hbase
2016-06-20 11:32:50.201 host 1 configure.sh(27883) Install UpdateFileClientConfig:1260 Updating file client config
2016-06-20 11:32:50.221 host 1 configure.sh(27883) Install UpdateFileClientConfig:1260 -defaultdb input is neither mapr nor hbase, will use the default value hbase
2016-06-20 11:32:50.238 host 1 configure.sh(27883) Install ConfigureDefaultDB:1553 mapr-hbase client is installed /opt/mapr/lib/mapr-hbase-5.1.0-mapr.jar
2016-06-20 11:32:50.258 host 1 configure.sh(27883) Install ConfigureDefaultDB:1576 set property mapr.hbase.default.db to value hbase
2016-06-20 11:32:50.311 host 1 configure.sh(27883) Install ConfigureOozieRole:1354 Skipping Oozie Role configuration... Not found
2016-06-20 11:32:50.324 host 1 configure.sh(27883) Install ConfigureMesosRoles:1318 Skipping Mesos Roles configuration... Not found
2016-06-20 11:32:50.338 host 1 configure.sh(27883) Install ConfigureMyriad:1310 Skipping Myriad Roles configuration... Not found
2016-06-20 11:32:50.368 host 1 configure.sh(27883) Install UpdateWardenConfig:1715 Updating Warden config
2016-06-20 11:32:50.503 host 1 configure.sh(27883) Install RunDiskSetup:453 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2016-06-20 11:32:50.520 host 1 configure.sh(27883) Install main:2952
2016-06-20 11:32:50.534 host 1 configure.sh(27883) Install main:2953 Node install FINISHED
2016-06-20 11:32:50.547 host 1 configure.sh(27883) Install main:2954 -----------------------
2016-08-23 11:15:23.230 host 1 configure.sh(31047) Install check_valid_ip_list:1968 Using 7222 port for CLDB 10.250.193.157
2016-08-23 11:15:23.270 host 1 configure.sh(31047) Install check_valid_ip_list:1968 Using 5181 port for ZooKeeper 10.250.193.159
2016-08-23 11:15:23.356 host 1 configure.sh(31047) Install CheckDiskSpace:473 Checking if Diskspace is on "/opt" is greater than 1024 MB
2016-08-23 11:15:23.369 host 1 configure.sh(31047) Install CheckDiskSpace:478 Diskspace on "/opt" is 129803 MB. Passed.
2016-08-23 11:15:23.387 host 1 configure.sh(31047) Install CheckDiskSpace:473 Checking if Diskspace is on "/tmp" is greater than 1024 MB
2016-08-23 11:15:23.400 host 1 configure.sh(31047) Install CheckDiskSpace:478 Diskspace on "/tmp" is 129803 MB. Passed.
2016-08-23 11:15:23.420 host 1 configure.sh(31047) Install CheckMem:531 Checking if system has at least 4096 MB of memory.
2016-08-23 11:15:23.433 host 1 configure.sh(31047) Install CheckMem:545 System has enough memory: 128894 MB
2016-08-23 11:15:23.446 host 1 configure.sh(31047) Install SetupDisksFile:434 Using disklist file /root/disk.list
2016-08-23 11:15:23.457 host 1 configure.sh(31047) Install SetupDisksFile:434 DiskList file "/root/disk.list" does not exist!
2016-08-23 11:29:29.819 host 1 configure.sh(34025) Install check_valid_ip_list:1968 Using 7222 port for CLDB 10.250.193.157
2016-08-23 11:29:29.856 host 1 configure.sh(34025) Install check_valid_ip_list:1968 Using 5181 port for ZooKeeper 10.250.193.159
2016-08-23 11:29:29.934 host 1 configure.sh(34025) Install CheckDiskSpace:473 Checking if Diskspace is on "/opt" is greater than 1024 MB
2016-08-23 11:29:29.947 host 1 configure.sh(34025) Install CheckDiskSpace:478 Diskspace on "/opt" is 129795 MB. Passed.
2016-08-23 11:29:29.964 host 1 configure.sh(34025) Install CheckDiskSpace:473 Checking if Diskspace is on "/tmp" is greater than 1024 MB
2016-08-23 11:29:29.978 host 1 configure.sh(34025) Install CheckDiskSpace:478 Diskspace on "/tmp" is 129795 MB. Passed.
2016-08-23 11:29:30.998 host 1 configure.sh(34025) Install CheckMem:531 Checking if system has at least 4096 MB of memory.
2016-08-23 11:29:30.11 host 1 configure.sh(34025) Install CheckMem:545 System has enough memory: 128894 MB
2016-08-23 11:29:30.25 host 1 configure.sh(34025) Install SetupDisksFile:434 Using disklist file /root/disklist
2016-08-23 11:29:30.38 host 1 configure.sh(34025) Install CheckDiskFile:498 Checking if "sdd" exists
2016-08-23 11:29:30.53 host 1 configure.sh(34025) Install CheckDiskFile:498 "sdd" not found!
2016-08-23 11:29:30.71 host 1 configure.sh(34025) Install CheckDiskFile:498 Checking if "sdc" exists
2016-08-23 11:29:30.85 host 1 configure.sh(34025) Install CheckDiskFile:498 "sdc" not found!
2016-08-23 11:29:30.102 host 1 configure.sh(34025) Install CheckDiskFile:498 Checking if "sde" exists
2016-08-23 11:29:30.117 host 1 configure.sh(34025) Install CheckDiskFile:498 "sde" not found!
2016-08-23 11:29:30.134 host 1 configure.sh(34025) Install CheckDiskFile:498 Checking if "sdf" exists
2016-08-23 11:29:30.149 host 1 configure.sh(34025) Install CheckDiskFile:498 "sdf" not found!
2016-08-23 11:29:30.166 host 1 configure.sh(34025) Install CheckDiskFile:498 Checking if "sdg" exists
2016-08-23 11:29:30.180 host 1 configure.sh(34025) Install CheckDiskFile:498 "sdg" not found!
2016-08-23 11:29:30.198 host 1 configure.sh(34025) Install CheckDiskFile:498 Checking if "sdh" exists
2016-08-23 11:29:30.212 host 1 configure.sh(34025) Install CheckDiskFile:498 "sdh" not found!
2016-08-23 11:29:30.229 host 1 configure.sh(34025) Install CheckDiskFile:498 Checking if "sdi" exists
2016-08-23 11:29:30.244 host 1 configure.sh(34025) Install CheckDiskFile:498 "sdi" not found!
2016-08-23 11:29:30.261 host 1 configure.sh(34025) Install CheckDiskFile:498 Checking if "sdj" exists
2016-08-23 11:29:30.276 host 1 configure.sh(34025) Install CheckDiskFile:498 "sdj" not found!
2016-08-23 11:29:30.293 host 1 configure.sh(34025) Install CheckDiskFile:498 Checking if "sdl" exists
2016-08-23 11:29:30.308 host 1 configure.sh(34025) Install CheckDiskFile:498 "sdl" not found!
2016-08-23 11:29:30.325 host 1 configure.sh(34025) Install CheckDiskFile:498 Checking if "sdm" exists
2016-08-23 11:29:30.339 host 1 configure.sh(34025) Install CheckDiskFile:498 "sdm" not found!
2016-08-23 11:29:30.357 host 1 configure.sh(34025) Install CheckDiskFile:498 Checking if "sdn" exists
2016-08-23 11:29:30.371 host 1 configure.sh(34025) Install CheckDiskFile:498 "sdn" not found!
2016-08-23 11:29:30.388 host 1 configure.sh(34025) Install CheckDiskFile:498 Checking if "sdk" exists
2016-08-23 11:29:30.403 host 1 configure.sh(34025) Install CheckDiskFile:498 "sdk" not found!
2016-08-23 11:30:59.556 host 1 configure.sh(41654) Install check_valid_ip_list:1968 Using 7222 port for CLDB 10.250.193.157
2016-08-23 11:30:59.593 host 1 configure.sh(41654) Install check_valid_ip_list:1968 Using 5181 port for ZooKeeper 10.250.193.159
2016-08-23 11:30:59.670 host 1 configure.sh(41654) Install CheckDiskSpace:473 Checking if Diskspace is on "/opt" is greater than 1024 MB
2016-08-23 11:30:59.683 host 1 configure.sh(41654) Install CheckDiskSpace:478 Diskspace on "/opt" is 129795 MB. Passed.
2016-08-23 11:30:59.702 host 1 configure.sh(41654) Install CheckDiskSpace:473 Checking if Diskspace is on "/tmp" is greater than 1024 MB
2016-08-23 11:30:59.715 host 1 configure.sh(41654) Install CheckDiskSpace:478 Diskspace on "/tmp" is 129795 MB. Passed.
2016-08-23 11:30:59.735 host 1 configure.sh(41654) Install CheckMem:531 Checking if system has at least 4096 MB of memory.
2016-08-23 11:30:59.748 host 1 configure.sh(41654) Install CheckMem:545 System has enough memory: 128894 MB
2016-08-23 11:30:59.761 host 1 configure.sh(41654) Install SetupDisksFile:434 Using disklist file /root/disklist
2016-08-23 11:30:59.775 host 1 configure.sh(41654) Install CheckDiskFile:498 Checking if "/dev/sdd" exists
2016-08-23 11:30:59.794 host 1 configure.sh(41654) Install CheckDiskFile:498 /dev/sdd is already being used on node. (Entity exists in "/opt/mapr/conf/disktab")
2016-08-23 11:38:41.556 host 1 configure.sh(18797) Install check_valid_ip_list:1968 Using 7222 port for CLDB 10.250.193.157
2016-08-23 11:38:41.591 host 1 configure.sh(18797) Install check_valid_ip_list:1968 Using 5181 port for ZooKeeper 10.250.193.159
2016-08-23 11:38:41.667 host 1 configure.sh(18797) Install CheckDiskSpace:473 Checking if Diskspace is on "/opt" is greater than 1024 MB
2016-08-23 11:38:41.681 host 1 configure.sh(18797) Install CheckDiskSpace:478 Diskspace on "/opt" is 129787 MB. Passed.
2016-08-23 11:38:41.698 host 1 configure.sh(18797) Install CheckDiskSpace:473 Checking if Diskspace is on "/tmp" is greater than 1024 MB
2016-08-23 11:38:41.712 host 1 configure.sh(18797) Install CheckDiskSpace:478 Diskspace on "/tmp" is 129787 MB. Passed.
2016-08-23 11:38:41.732 host 1 configure.sh(18797) Install CheckMem:531 Checking if system has at least 4096 MB of memory.
2016-08-23 11:38:41.745 host 1 configure.sh(18797) Install CheckMem:545 System has enough memory: 128894 MB
2016-08-23 11:38:41.759 host 1 configure.sh(18797) Install SetupDisksFile:434 Using disklist file /opt/mapr/conf/disktab
2016-08-23 11:38:41.772 host 1 configure.sh(18797) Install CheckDiskFile:498 Checking if "#" exists
2016-08-23 11:38:41.786 host 1 configure.sh(18797) Install CheckDiskFile:498 "#" not found!
2016-08-23 11:38:41.801 host 1 configure.sh(18797) Install CheckDiskFile:498 # is already being used on node. (Entity exists in "/opt/mapr/conf/disktab")
2016-08-23 12:05:06.106 host 1 configure.sh(24026) Install check_valid_ip_list:1968 Using 7222 port for CLDB host 1
2016-08-23 12:05:06.121 host 1 configure.sh(24026) Install check_valid_ip_list:1968 Using 7222 port for CLDB host 2
2016-08-23 12:05:06.137 host 1 configure.sh(24026) Install check_valid_ip_list:1968 Using 7222 port for CLDB host 3
2016-08-23 12:05:06.173 host 1 configure.sh(24026) Install check_valid_ip_list:1968 Using 5181 port for ZooKeeper host 1
2016-08-23 12:05:06.201 host 1 configure.sh(24026) Install check_valid_ip_list:1968 Using 5181 port for ZooKeeper host 2
2016-08-23 12:05:06.235 host 1 configure.sh(24026) Install check_valid_ip_list:1968 Using 5181 port for ZooKeeper host 3
2016-08-23 12:05:06.324 host 1 configure.sh(24026) Install CheckDiskSpace:473 Checking if Diskspace is on "/opt" is greater than 1024 MB
2016-08-23 12:05:06.337 host 1 configure.sh(24026) Install CheckDiskSpace:478 Diskspace on "/opt" is 129779 MB. Passed.
2016-08-23 12:05:06.354 host 1 configure.sh(24026) Install CheckDiskSpace:473 Checking if Diskspace is on "/tmp" is greater than 1024 MB
2016-08-23 12:05:06.366 host 1 configure.sh(24026) Install CheckDiskSpace:478 Diskspace on "/tmp" is 129779 MB. Passed.
2016-08-23 12:05:06.389 host 1 configure.sh(24026) Install CheckMem:531 Checking if system has at least 4096 MB of memory.
2016-08-23 12:05:06.403 host 1 configure.sh(24026) Install CheckMem:545 System has enough memory: 128894 MB
2016-08-23 12:05:06.417 host 1 configure.sh(24026) Install SetupDisksFile:434 Using disklist file /tmp/disklist
2016-08-23 12:05:06.431 host 1 configure.sh(24026) Install CheckDiskFile:498 Checking if "/dev/sdd" exists
2016-08-23 12:05:06.449 host 1 configure.sh(24026) Install CheckDiskFile:498 /dev/sdd is already being used on node. (Entity exists in "/opt/mapr/conf/disktab")
2016-08-24 11:11:46.57 host 1 configure.sh(4242) Install check_valid_ip_list:1968 Using 7222 port for CLDB host 1
2016-08-24 11:11:46.73 host 1 configure.sh(4242) Install check_valid_ip_list:1968 Using 7222 port for CLDB host 2
2016-08-24 11:11:46.89 host 1 configure.sh(4242) Install check_valid_ip_list:1968 Using 7222 port for CLDB host 3
2016-08-24 11:11:46.125 host 1 configure.sh(4242) Install check_valid_ip_list:1968 Using 5181 port for ZooKeeper host 1
2016-08-24 11:11:46.150 host 1 configure.sh(4242) Install check_valid_ip_list:1968 Using 5181 port for ZooKeeper host 2
2016-08-24 11:11:46.182 host 1 configure.sh(4242) Install check_valid_ip_list:1968 Using 5181 port for ZooKeeper host 3
2016-08-24 11:11:46.270 host 1 configure.sh(4242) Install CheckDiskSpace:473 Checking if Diskspace is on "/opt" is greater than 1024 MB
2016-08-24 11:11:46.284 host 1 configure.sh(4242) Install CheckDiskSpace:478 Diskspace on "/opt" is 129329 MB. Passed.
2016-08-24 11:11:46.301 host 1 configure.sh(4242) Install CheckDiskSpace:473 Checking if Diskspace is on "/tmp" is greater than 1024 MB
2016-08-24 11:11:46.315 host 1 configure.sh(4242) Install CheckDiskSpace:478 Diskspace on "/tmp" is 129329 MB. Passed.
2016-08-24 11:11:46.336 host 1 configure.sh(4242) Install CheckMem:531 Checking if system has at least 4096 MB of memory.
2016-08-24 11:11:46.349 host 1 configure.sh(4242) Install CheckMem:545 System has enough memory: 128894 MB
2016-08-24 11:11:46.363 host 1 configure.sh(4242) Install SetupDisksFile:434 Using disklist file /tmp/disklist
2016-08-24 11:11:46.377 host 1 configure.sh(4242) Install CheckDiskFile:498 Checking if "/dev/sdd" exists
2016-08-24 11:11:46.397 host 1 configure.sh(4242) Install CheckDiskFile:498 /dev/sdd is already being used on node. (Entity exists in "/opt/mapr/conf/disktab")
2016-08-24 11:46:52.253 host 1 configure.sh(12088) Install check_valid_ip_list:1968 Using 7222 port for CLDB host 1
2016-08-24 11:46:52.270 host 1 configure.sh(12088) Install check_valid_ip_list:1968 Using 7222 port for CLDB host 2
2016-08-24 11:46:52.287 host 1 configure.sh(12088) Install check_valid_ip_list:1968 Using 7222 port for CLDB host 3
2016-08-24 11:46:52.324 host 1 configure.sh(12088) Install check_valid_ip_list:1968 Using 5181 port for ZooKeeper host 1
2016-08-24 11:46:52.350 host 1 configure.sh(12088) Install check_valid_ip_list:1968 Using 5181 port for ZooKeeper host 2
2016-08-24 11:46:52.387 host 1 configure.sh(12088) Install check_valid_ip_list:1968 Using 5181 port for ZooKeeper host 3
2016-08-24 11:46:52.479 host 1 configure.sh(12088) Install CheckDiskSpace:473 Checking if Diskspace is on "/opt" is greater than 1024 MB
2016-08-24 11:46:52.492 host 1 configure.sh(12088) Install CheckDiskSpace:478 Diskspace on "/opt" is 129311 MB. Passed.
2016-08-24 11:46:52.510 host 1 configure.sh(12088) Install CheckDiskSpace:473 Checking if Diskspace is on "/tmp" is greater than 1024 MB
2016-08-24 11:46:52.523 host 1 configure.sh(12088) Install CheckDiskSpace:478 Diskspace on "/tmp" is 129311 MB. Passed.
2016-08-24 11:46:52.543 host 1 configure.sh(12088) Install CheckMem:531 Checking if system has at least 4096 MB of memory.
2016-08-24 11:46:52.556 host 1 configure.sh(12088) Install CheckMem:545 System has enough memory: 128894 MB
2016-08-24 11:46:52.570 host 1 configure.sh(12088) Install SetupDisksFile:434 Using disklist file /tmp/disklist
2016-08-24 11:46:52.583 host 1 configure.sh(12088) Install CheckDiskFile:498 Checking if "/dev/sdd" exists
2016-08-24 11:46:52.602 host 1 configure.sh(12088) Install CheckDiskFile:498 /dev/sdd is already being used on node. (Entity exists in "/opt/mapr/conf/disktab")
2016-09-13 15:38:14.328 host 1 configure.sh(37979) Install check_valid_ip_list:1968 Using 7222 port for CLDB secure=true
2016-09-13 15:38:14.511 host 1 configure.sh(37979) Install main:2842
2016-09-13 15:38:14.524 host 1 configure.sh(37979) Install main:2843 Node install STARTED
2016-09-13 15:38:14.537 host 1 configure.sh(37979) Install main:2844 -----------------------
2016-09-13 15:38:14.550 host 1 configure.sh(37979) Install main:2845 CMD: /opt/mapr/server/configure.sh -R
2016-09-13 15:38:14.584 host 1 configure.sh(37979) Install main:2883 Cluster run as secure=true
2016-09-13 15:38:14.609 host 1 configure.sh(37979) Install ConfigMaprUser:435 MAPR_USER: maprdev MAPR_GROUP: maprdev
2016-09-13 15:38:14.622 host 1 configure.sh(37979) Install ConfigMaprUser:436 CREATE_USER:
2016-09-13 15:38:14.634 host 1 configure.sh(37979) Install ConfigMaprUser:437 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2016-09-13 15:38:14.653 host 1 configure.sh(37979) Install ConfigMaprUser:511 Give privilleges to maprdev
2016-09-13 15:38:14.690 host 1 configure.sh(37979) Install ConfigureRunUserMaprDirs:269 Config MAPR_USER for logs/conf of MapR Services
2016-09-13 15:38:14.805 host 1 configure.sh(37979) Install ConfigMaprUser:529 Update /opt/mapr/conf/daemon.conf
2016-09-13 15:38:14.830 host 1 configure.sh(37979) Install ConfigMaprUser:558 set maprdev limits in /etc/security/limits.conf
2016-09-13 15:38:15.804 host 1 configure.sh(37979) Install ConfigMaprUser:604 maprdev/maprdev user/group configured
2016-09-13 15:38:15.881 host 1 configure.sh(37979) Install UpdateFileClientConfig:1260 Updating file client config
2016-09-13 15:38:16.38 host 1 configure.sh(37979) Install ConfigureRunUserForZKRole:88 Config MAPR_USER for ZooKeeper Role
2016-09-13 15:38:16.199 host 1 configure.sh(37979) Install ConfigureWSRole:1179 Configuring Webserver
2016-09-13 15:38:16.218 host 1 configure.sh(37979) Install ConfigureJTRole:1292 Skipping Job Tracker Role configuration... Not found
2016-09-13 15:38:16.231 host 1 configure.sh(37979) Install ConfigureTTRole:1371 Skipping TaskTracker Role configuration... Not found
2016-09-13 15:38:16.244 host 1 configure.sh(37979) Install ConfigureDrillBitsRole:1389 Configuring Drill Bits Role
2016-09-13 15:38:16.280 host 1 configure.sh(37979) Install ConfigureHBMRole:1488 Skipping Hbase Master Role configuration... Not found
2016-09-13 15:38:16.294 host 1 configure.sh(37979) Install ConfigureHBRRole:1524 Configuring Hbase RS Role
2016-09-13 15:38:16.307 host 1 configure.sh(37979) Install ConfigureHBase:1421 Configuring Hbase
2016-09-13 15:38:16.389 host 1 configure.sh(37979) Install UpdateFileClientConfig:1260 Updating file client config
2016-09-13 15:38:16.412 host 1 configure.sh(37979) Install ConfigureHBIRole:1507 Configuring Hbase Client Role
2016-09-13 15:38:16.425 host 1 configure.sh(37979) Install ConfigureHBase:1421 Configuring Hbase
2016-09-13 15:38:16.507 host 1 configure.sh(37979) Install UpdateFileClientConfig:1260 Updating file client config
2016-09-13 15:38:16.528 host 1 configure.sh(37979) Install UpdateFileClientConfig:1260 -defaultdb input is neither mapr nor hbase, will use the default value hbase
2016-09-13 15:38:16.546 host 1 configure.sh(37979) Install ConfigureDefaultDB:1553 mapr-hbase client is installed /opt/mapr/lib/mapr-hbase-5.1.0-mapr.jar
2016-09-13 15:38:16.567 host 1 configure.sh(37979) Install ConfigureDefaultDB:1576 set property mapr.hbase.default.db to value hbase
2016-09-13 15:38:16.621 host 1 configure.sh(37979) Install ConfigureOozieRole:1354 Skipping Oozie Role configuration... Not found
2016-09-13 15:38:16.635 host 1 configure.sh(37979) Install ConfigureMesosRoles:1318 Skipping Mesos Roles configuration... Not found
2016-09-13 15:38:16.648 host 1 configure.sh(37979) Install ConfigureMyriad:1310 Skipping Myriad Roles configuration... Not found
2016-09-13 15:38:16.678 host 1 configure.sh(37979) Install UpdateWardenConfig:1715 Updating Warden config
2016-09-13 15:38:16.822 host 1 configure.sh(37979) Install RunDiskSetup:453 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2016-09-13 15:38:16.839 host 1 configure.sh(37979) Install main:2952
2016-09-13 15:38:16.852 host 1 configure.sh(37979) Install main:2953 Node install FINISHED
2016-09-13 15:38:16.866 host 1 configure.sh(37979) Install main:2954 -----------------------
2016-09-13 15:45:09.25 host 1 configure.sh(46038) Install check_valid_ip_list:2159 Using 7222 port for CLDB secure=true
2016-09-13 15:45:09.203 host 1 configure.sh(46038) Install main:3039
2016-09-13 15:45:09.216 host 1 configure.sh(46038) Install main:3040 Node install STARTED
2016-09-13 15:45:09.228 host 1 configure.sh(46038) Install main:3041 -----------------------
2016-09-13 15:45:09.240 host 1 configure.sh(46038) Install main:3042 CMD: /opt/mapr/server/configure.sh -R
2016-09-13 15:45:09.274 host 1 configure.sh(46038) Install main:3080 Cluster run as secure=true
2016-09-13 15:45:09.295 host 1 configure.sh(46038) Install ConfigMaprUser:423 MAPR_USER: maprdev MAPR_GROUP: maprdev
2016-09-13 15:45:09.307 host 1 configure.sh(46038) Install ConfigMaprUser:424 CREATE_USER:
2016-09-13 15:45:09.319 host 1 configure.sh(46038) Install ConfigMaprUser:425 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2016-09-13 15:45:09.338 host 1 configure.sh(46038) Install ConfigMaprUser:499 Give privilleges to maprdev
2016-09-13 15:45:09.376 host 1 configure.sh(46038) Install ConfigureRunUserMaprDirs:270 Config MAPR_USER for logs/conf of MapR Services
2016-09-13 15:45:09.496 host 1 configure.sh(46038) Install ConfigMaprUser:517 Update /opt/mapr/conf/daemon.conf
2016-09-13 15:45:09.521 host 1 configure.sh(46038) Install ConfigMaprUser:546 set maprdev limits in /etc/security/limits.conf
2016-09-13 15:45:10.465 host 1 configure.sh(46038) Install ConfigMaprUser:592 maprdev/maprdev user/group configured
2016-09-13 15:45:10.539 host 1 configure.sh(46038) Install UpdateFileClientConfig:1274 Updating file client config
2016-09-13 15:45:10.693 host 1 configure.sh(46038) Install ConfigureRunUserForZKRole:89 Config MAPR_USER for ZooKeeper Role
2016-09-13 15:45:10.859 host 1 configure.sh(46038) Install ConfigureWSRole:1193 Configuring Webserver
2016-09-13 15:45:10.878 host 1 configure.sh(46038) Install ConfigureJTRole:1306 Skipping Job Tracker Role configuration... Not found
2016-09-13 15:45:10.891 host 1 configure.sh(46038) Install ConfigureTTRole:1390 Skipping TaskTracker Role configuration... Not found
2016-09-13 15:45:10.904 host 1 configure.sh(46038) Install ConfigureDrillBitsRole:1408 Configuring Drill Bits Role
2016-09-13 15:45:10.934 host 1 configure.sh(46038) Install ConfigureHBMRole:1531 Skipping Hbase Master Role configuration... Not found
2016-09-13 15:45:10.947 host 1 configure.sh(46038) Install ConfigureHBRRole:1567 Configuring Hbase RS Role
2016-09-13 15:45:10.961 host 1 configure.sh(46038) Install ConfigureHBase:1440 Configuring Hbase
2016-09-13 15:45:11.70 host 1 configure.sh(46038) Install UpdateFileClientConfig:1274 Updating file client config
2016-09-13 15:45:11.92 host 1 configure.sh(46038) Install ConfigureHBIRole:1550 Configuring Hbase Client Role
2016-09-13 15:45:11.105 host 1 configure.sh(46038) Install ConfigureHBase:1440 Configuring Hbase
2016-09-13 15:45:11.201 host 1 configure.sh(46038) Install UpdateFileClientConfig:1274 Updating file client config
2016-09-13 15:45:11.221 host 1 configure.sh(46038) Install UpdateFileClientConfig:1274 -defaultdb input is neither mapr nor hbase, will use the default value hbase
2016-09-13 15:45:11.240 host 1 configure.sh(46038) Install ConfigureDefaultDB:1596 mapr-hbase client is installed /opt/mapr/lib/mapr-hbase-5.2.0-mapr-tests.jar
2016-09-13 15:45:11.259 host 1 configure.sh(46038) Install ConfigureDefaultDB:1619 set property mapr.hbase.default.db to value hbase
2016-09-13 15:45:11.272 host 1 configure.sh(46038) Install ConfigureAsyncDefaultDB:1715 Skipping Asynchbase Role configuration... Not found
2016-09-13 15:45:11.324 host 1 configure.sh(46038) Install ConfigureOozieRole:1368 Skipping Oozie Role configuration... Not found
2016-09-13 15:45:11.338 host 1 configure.sh(46038) Install ConfigureMesosRoles:1332 Skipping Mesos Roles configuration... Not found
2016-09-13 15:45:11.351 host 1 configure.sh(46038) Install ConfigureMyriad:1324 Skipping Myriad Roles configuration... Not found
2016-09-13 15:45:11.382 host 1 configure.sh(46038) Install UpdateWardenConfig:1906 Updating Warden config
2016-09-13 15:45:11.519 host 1 configure.sh(46038) Install RunDiskSetup:466 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2016-09-13 15:45:11.536 host 1 configure.sh(46038) Install main:3157
2016-09-13 15:45:11.549 host 1 configure.sh(46038) Install main:3158 Node install FINISHED
2016-09-13 15:45:11.563 host 1 configure.sh(46038) Install main:3159 -----------------------
2016-09-13 15:46:12.865 host 1 configure.sh(1180) Install check_valid_ip_list:2159 Using 7222 port for CLDB secure=true
2016-09-13 15:46:13.42 host 1 configure.sh(1180) Install main:3039
2016-09-13 15:46:13.55 host 1 configure.sh(1180) Install main:3040 Node install STARTED
2016-09-13 15:46:13.68 host 1 configure.sh(1180) Install main:3041 -----------------------
2016-09-13 15:46:13.81 host 1 configure.sh(1180) Install main:3042 CMD: /opt/mapr/server/configure.sh -R
2016-09-13 15:46:13.116 host 1 configure.sh(1180) Install main:3080 Cluster run as secure=true
2016-09-13 15:46:13.138 host 1 configure.sh(1180) Install ConfigMaprUser:423 MAPR_USER: maprdev MAPR_GROUP: maprdev
2016-09-13 15:46:13.151 host 1 configure.sh(1180) Install ConfigMaprUser:424 CREATE_USER:
2016-09-13 15:46:13.163 host 1 configure.sh(1180) Install ConfigMaprUser:425 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2016-09-13 15:46:13.182 host 1 configure.sh(1180) Install ConfigMaprUser:499 Give privilleges to maprdev
2016-09-13 15:46:13.220 host 1 configure.sh(1180) Install ConfigureRunUserMaprDirs:270 Config MAPR_USER for logs/conf of MapR Services
2016-09-13 15:46:13.334 host 1 configure.sh(1180) Install ConfigMaprUser:517 Update /opt/mapr/conf/daemon.conf
2016-09-13 15:46:13.358 host 1 configure.sh(1180) Install ConfigMaprUser:546 set maprdev limits in /etc/security/limits.conf
2016-09-13 15:46:14.306 host 1 configure.sh(1180) Install ConfigMaprUser:592 maprdev/maprdev user/group configured
2016-09-13 15:46:14.381 host 1 configure.sh(1180) Install UpdateFileClientConfig:1274 Updating file client config
2016-09-13 15:46:14.535 host 1 configure.sh(1180) Install ConfigureRunUserForZKRole:89 Config MAPR_USER for ZooKeeper Role
2016-09-13 15:46:14.697 host 1 configure.sh(1180) Install ConfigureWSRole:1193 Configuring Webserver
2016-09-13 15:46:14.716 host 1 configure.sh(1180) Install ConfigureJTRole:1306 Skipping Job Tracker Role configuration... Not found
2016-09-13 15:46:14.729 host 1 configure.sh(1180) Install ConfigureTTRole:1390 Skipping TaskTracker Role configuration... Not found
2016-09-13 15:46:14.743 host 1 configure.sh(1180) Install ConfigureDrillBitsRole:1408 Configuring Drill Bits Role
2016-09-13 15:46:14.773 host 1 configure.sh(1180) Install ConfigureHBMRole:1531 Skipping Hbase Master Role configuration... Not found
2016-09-13 15:46:14.787 host 1 configure.sh(1180) Install ConfigureHBRRole:1567 Configuring Hbase RS Role
2016-09-13 15:46:14.800 host 1 configure.sh(1180) Install ConfigureHBase:1440 Configuring Hbase
2016-09-13 15:46:14.896 host 1 configure.sh(1180) Install UpdateFileClientConfig:1274 Updating file client config
2016-09-13 15:46:14.919 host 1 configure.sh(1180) Install ConfigureHBIRole:1550 Configuring Hbase Client Role
2016-09-13 15:46:14.932 host 1 configure.sh(1180) Install ConfigureHBase:1440 Configuring Hbase
2016-09-13 15:46:15.29 host 1 configure.sh(1180) Install UpdateFileClientConfig:1274 Updating file client config
2016-09-13 15:46:15.50 host 1 configure.sh(1180) Install UpdateFileClientConfig:1274 -defaultdb input is neither mapr nor hbase, will use the default value hbase
2016-09-13 15:46:15.68 host 1 configure.sh(1180) Install ConfigureDefaultDB:1596 mapr-hbase client is installed /opt/mapr/lib/mapr-hbase-5.2.0-mapr-tests.jar
2016-09-13 15:46:15.88 host 1 configure.sh(1180) Install ConfigureDefaultDB:1619 set property mapr.hbase.default.db to value hbase
2016-09-13 15:46:15.102 host 1 configure.sh(1180) Install ConfigureAsyncDefaultDB:1715 Skipping Asynchbase Role configuration... Not found
2016-09-13 15:46:15.151 host 1 configure.sh(1180) Install ConfigureOozieRole:1368 Skipping Oozie Role configuration... Not found
2016-09-13 15:46:15.164 host 1 configure.sh(1180) Install ConfigureMesosRoles:1332 Skipping Mesos Roles configuration... Not found
2016-09-13 15:46:15.176 host 1 configure.sh(1180) Install ConfigureMyriad:1324 Skipping Myriad Roles configuration... Not found
2016-09-13 15:46:15.205 host 1 configure.sh(1180) Install UpdateWardenConfig:1906 Updating Warden config
2016-09-13 15:46:15.338 host 1 configure.sh(1180) Install RunDiskSetup:466 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2016-09-13 15:46:15.355 host 1 configure.sh(1180) Install main:3157
2016-09-13 15:46:15.369 host 1 configure.sh(1180) Install main:3158 Node install FINISHED
2016-09-13 15:46:15.382 host 1 configure.sh(1180) Install main:3159 -----------------------
2016-09-13 15:47:46.376 host 1 configure.sh(5756) Install check_valid_ip_list:2159 Using 7222 port for CLDB secure=true
2016-09-13 15:47:46.559 host 1 configure.sh(5756) Install main:3039
2016-09-13 15:47:46.572 host 1 configure.sh(5756) Install main:3040 Node install STARTED
2016-09-13 15:47:46.585 host 1 configure.sh(5756) Install main:3041 -----------------------
2016-09-13 15:47:46.598 host 1 configure.sh(5756) Install main:3042 CMD: /opt/mapr/server/configure.sh -R
2016-09-13 15:47:46.633 host 1 configure.sh(5756) Install main:3080 Cluster run as secure=true
2016-09-13 15:47:46.655 host 1 configure.sh(5756) Install ConfigMaprUser:423 MAPR_USER: maprdev MAPR_GROUP: maprdev
2016-09-13 15:47:46.667 host 1 configure.sh(5756) Install ConfigMaprUser:424 CREATE_USER:
2016-09-13 15:47:46.680 host 1 configure.sh(5756) Install ConfigMaprUser:425 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2016-09-13 15:47:46.699 host 1 configure.sh(5756) Install ConfigMaprUser:499 Give privilleges to maprdev
2016-09-13 15:47:46.737 host 1 configure.sh(5756) Install ConfigureRunUserMaprDirs:270 Config MAPR_USER for logs/conf of MapR Services
2016-09-13 15:47:46.854 host 1 configure.sh(5756) Install ConfigMaprUser:517 Update /opt/mapr/conf/daemon.conf
2016-09-13 15:47:46.879 host 1 configure.sh(5756) Install ConfigMaprUser:546 set maprdev limits in /etc/security/limits.conf
2016-09-13 15:47:47.847 host 1 configure.sh(5756) Install ConfigMaprUser:592 maprdev/maprdev user/group configured
2016-09-13 15:47:47.921 host 1 configure.sh(5756) Install UpdateFileClientConfig:1274 Updating file client config
2016-09-13 15:47:48.77 host 1 configure.sh(5756) Install ConfigureRunUserForZKRole:89 Config MAPR_USER for ZooKeeper Role
2016-09-13 15:47:48.237 host 1 configure.sh(5756) Install ConfigureWSRole:1193 Configuring Webserver
2016-09-13 15:47:48.257 host 1 configure.sh(5756) Install ConfigureJTRole:1306 Skipping Job Tracker Role configuration... Not found
2016-09-13 15:47:48.270 host 1 configure.sh(5756) Install ConfigureTTRole:1390 Skipping TaskTracker Role configuration... Not found
2016-09-13 15:47:48.283 host 1 configure.sh(5756) Install ConfigureDrillBitsRole:1408 Configuring Drill Bits Role
2016-09-13 15:47:48.314 host 1 configure.sh(5756) Install ConfigureHBMRole:1531 Skipping Hbase Master Role configuration... Not found
2016-09-13 15:47:48.327 host 1 configure.sh(5756) Install ConfigureHBRRole:1567 Configuring Hbase RS Role
2016-09-13 15:47:48.341 host 1 configure.sh(5756) Install ConfigureHBase:1440 Configuring Hbase
2016-09-13 15:47:48.439 host 1 configure.sh(5756) Install UpdateFileClientConfig:1274 Updating file client config
2016-09-13 15:47:48.463 host 1 configure.sh(5756) Install ConfigureHBIRole:1550 Configuring Hbase Client Role
2016-09-13 15:47:48.476 host 1 configure.sh(5756) Install ConfigureHBase:1440 Configuring Hbase
2016-09-13 15:47:48.574 host 1 configure.sh(5756) Install UpdateFileClientConfig:1274 Updating file client config
2016-09-13 15:47:48.595 host 1 configure.sh(5756) Install UpdateFileClientConfig:1274 -defaultdb input is neither mapr nor hbase, will use the default value hbase
2016-09-13 15:47:48.614 host 1 configure.sh(5756) Install ConfigureDefaultDB:1596 mapr-hbase client is installed /opt/mapr/lib/mapr-hbase-5.2.0-mapr-tests.jar
2016-09-13 15:47:48.634 host 1 configure.sh(5756) Install ConfigureDefaultDB:1619 set property mapr.hbase.default.db to value hbase
2016-09-13 15:47:48.648 host 1 configure.sh(5756) Install ConfigureAsyncDefaultDB:1715 Skipping Asynchbase Role configuration... Not found
2016-09-13 15:47:48.700 host 1 configure.sh(5756) Install ConfigureOozieRole:1368 Skipping Oozie Role configuration... Not found
2016-09-13 15:47:48.714 host 1 configure.sh(5756) Install ConfigureMesosRoles:1332 Skipping Mesos Roles configuration... Not found
2016-09-13 15:47:48.727 host 1 configure.sh(5756) Install ConfigureMyriad:1324 Skipping Myriad Roles configuration... Not found
2016-09-13 15:47:48.758 host 1 configure.sh(5756) Install UpdateWardenConfig:1906 Updating Warden config
2016-09-13 15:47:48.891 host 1 configure.sh(5756) Install RunDiskSetup:466 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2016-09-13 15:47:48.908 host 1 configure.sh(5756) Install main:3157
2016-09-13 15:47:48.922 host 1 configure.sh(5756) Install main:3158 Node install FINISHED
2016-09-13 15:47:48.935 host 1 configure.sh(5756) Install main:3159 -----------------------
2016-09-13 15:49:08.87 host 1 configure.sh(15392) Install check_valid_ip_list:2159 Using 7222 port for CLDB secure=true
2016-09-13 15:49:08.267 host 1 configure.sh(15392) Install main:3039
2016-09-13 15:49:08.280 host 1 configure.sh(15392) Install main:3040 Node install STARTED
2016-09-13 15:49:08.293 host 1 configure.sh(15392) Install main:3041 -----------------------
2016-09-13 15:49:08.306 host 1 configure.sh(15392) Install main:3042 CMD: /opt/mapr/server/configure.sh -R
2016-09-13 15:49:08.340 host 1 configure.sh(15392) Install main:3080 Cluster run as secure=true
2016-09-13 15:49:08.362 host 1 configure.sh(15392) Install ConfigMaprUser:423 MAPR_USER: maprdev MAPR_GROUP: maprdev
2016-09-13 15:49:08.375 host 1 configure.sh(15392) Install ConfigMaprUser:424 CREATE_USER:
2016-09-13 15:49:08.387 host 1 configure.sh(15392) Install ConfigMaprUser:425 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2016-09-13 15:49:08.406 host 1 configure.sh(15392) Install ConfigMaprUser:499 Give privilleges to maprdev
2016-09-13 15:49:08.444 host 1 configure.sh(15392) Install ConfigureRunUserMaprDirs:270 Config MAPR_USER for logs/conf of MapR Services
2016-09-13 15:49:08.549 host 1 configure.sh(15392) Install ConfigMaprUser:517 Update /opt/mapr/conf/daemon.conf
2016-09-13 15:49:08.573 host 1 configure.sh(15392) Install ConfigMaprUser:546 set maprdev limits in /etc/security/limits.conf
2016-09-13 15:49:09.524 host 1 configure.sh(15392) Install ConfigMaprUser:592 maprdev/maprdev user/group configured
2016-09-13 15:49:09.598 host 1 configure.sh(15392) Install UpdateFileClientConfig:1274 Updating file client config
2016-09-13 15:49:09.753 host 1 configure.sh(15392) Install ConfigureRunUserForZKRole:89 Config MAPR_USER for ZooKeeper Role
2016-09-13 15:49:09.912 host 1 configure.sh(15392) Install ConfigureWSRole:1193 Configuring Webserver
2016-09-13 15:49:09.931 host 1 configure.sh(15392) Install ConfigureJTRole:1306 Skipping Job Tracker Role configuration... Not found
2016-09-13 15:49:09.944 host 1 configure.sh(15392) Install ConfigureTTRole:1390 Skipping TaskTracker Role configuration... Not found
2016-09-13 15:49:09.957 host 1 configure.sh(15392) Install ConfigureDrillBitsRole:1408 Configuring Drill Bits Role
2016-09-13 15:49:09.988 host 1 configure.sh(15392) Install ConfigureHBMRole:1531 Skipping Hbase Master Role configuration... Not found
2016-09-13 15:49:10.1 host 1 configure.sh(15392) Install ConfigureHBRRole:1567 Configuring Hbase RS Role
2016-09-13 15:49:10.15 host 1 configure.sh(15392) Install ConfigureHBase:1440 Configuring Hbase
2016-09-13 15:49:10.114 host 1 configure.sh(15392) Install UpdateFileClientConfig:1274 Updating file client config
2016-09-13 15:49:10.138 host 1 configure.sh(15392) Install ConfigureHBIRole:1550 Configuring Hbase Client Role
2016-09-13 15:49:10.151 host 1 configure.sh(15392) Install ConfigureHBase:1440 Configuring Hbase
2016-09-13 15:49:10.249 host 1 configure.sh(15392) Install UpdateFileClientConfig:1274 Updating file client config
2016-09-13 15:49:10.270 host 1 configure.sh(15392) Install UpdateFileClientConfig:1274 -defaultdb input is neither mapr nor hbase, will use the default value hbase
2016-09-13 15:49:10.288 host 1 configure.sh(15392) Install ConfigureDefaultDB:1596 mapr-hbase client is installed /opt/mapr/lib/mapr-hbase-5.2.0-mapr-tests.jar
2016-09-13 15:49:10.308 host 1 configure.sh(15392) Install ConfigureDefaultDB:1619 set property mapr.hbase.default.db to value hbase
2016-09-13 15:49:10.322 host 1 configure.sh(15392) Install ConfigureAsyncDefaultDB:1715 Skipping Asynchbase Role configuration... Not found
2016-09-13 15:49:10.375 host 1 configure.sh(15392) Install ConfigureOozieRole:1368 Skipping Oozie Role configuration... Not found
2016-09-13 15:49:10.389 host 1 configure.sh(15392) Install ConfigureMesosRoles:1332 Skipping Mesos Roles configuration... Not found
2016-09-13 15:49:10.403 host 1 configure.sh(15392) Install ConfigureMyriad:1324 Skipping Myriad Roles configuration... Not found
2016-09-13 15:49:10.433 host 1 configure.sh(15392) Install UpdateWardenConfig:1906 Updating Warden config
2016-09-13 15:49:10.570 host 1 configure.sh(15392) Install RunDiskSetup:466 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2016-09-13 15:49:10.587 host 1 configure.sh(15392) Install main:3157
2016-09-13 15:49:10.600 host 1 configure.sh(15392) Install main:3158 Node install FINISHED
2016-09-13 15:49:10.613 host 1 configure.sh(15392) Install main:3159 -----------------------
2016-12-09 10:41:53.586 host 1 configure.sh(38037) Install check_valid_ip_list:2159 Using 7222 port for CLDB secure=true
2016-12-09 10:41:53.734 host 1 configure.sh(38037) Install check_valid_ip_list:2159 Using 9200 port for Elasticsearch host 1
2016-12-09 10:41:53.750 host 1 configure.sh(38037) Install check_valid_ip_list:2159 Using 9200 port for Elasticsearch host 2
2016-12-09 10:41:53.767 host 1 configure.sh(38037) Install check_valid_ip_list:2159 Using 9200 port for Elasticsearch host 3
2016-12-09 10:41:53.802 host 1 configure.sh(38037) Install check_valid_ip_list:2159 Using 4242 port for OpenTsdb host 1
2016-12-09 10:41:53.819 host 1 configure.sh(38037) Install check_valid_ip_list:2159 Using 4242 port for OpenTsdb host 2
2016-12-09 10:41:53.835 host 1 configure.sh(38037) Install check_valid_ip_list:2159 Using 4242 port for OpenTsdb host 3
2016-12-09 10:41:53.864 host 1 configure.sh(38037) Install main:3039
2016-12-09 10:41:53.877 host 1 configure.sh(38037) Install main:3040 Node install STARTED
2016-12-09 10:41:53.890 host 1 configure.sh(38037) Install main:3041 -----------------------
2016-12-09 10:41:53.903 host 1 configure.sh(38037) Install main:3042 CMD: /opt/mapr/server/configure.sh -R -ES host 1, host 2, host 3 -OT host 1, host 2, host 3
2016-12-09 10:41:53.942 host 1 configure.sh(38037) Install main:3080 Cluster run as secure=true
2016-12-09 10:41:53.962 host 1 configure.sh(38037) Install ConstructMapRMonitoringConfFile:939 Contructing MonitoringConfFile: openTsdb node list: host 1:4242 host 2:4242 host 3:4242
2016-12-09 10:41:53.978 host 1 configure.sh(38037) Install ConstructMapRMonitoringConfFile:949 Adding "<openTsdbServers> host 1:4242 host 2:4242 host 3:4242" to "/opt/mapr/conf/mapr-monitoring.conf"
2016-12-09 10:41:53.995 host 1 configure.sh(38037) Install ConstructMapRMonitoringConfFile:955 Contructing MonitoringConfFile: elasticsearch node list: host 1:9200 host 2:9200 host 3:9200
2016-12-09 10:41:54.11 host 1 configure.sh(38037) Install ConstructMapRMonitoringConfFile:965 Adding "<elasticsearchServers> host 1:9200 host 2:9200 host 3:9200" to "/opt/mapr/conf/mapr-monitoring.conf"
2016-12-09 10:41:54.24 host 1 configure.sh(38037) Install ConstructMapRMonitoringConfFile:981 Contructing MonitoringConfFile: Done
2016-12-09 10:41:54.48 host 1 configure.sh(38037) Install ConfigMaprUser:423 MAPR_USER: maprdev MAPR_GROUP: maprdev
2016-12-09 10:41:54.60 host 1 configure.sh(38037) Install ConfigMaprUser:424 CREATE_USER:
2016-12-09 10:41:54.71 host 1 configure.sh(38037) Install ConfigMaprUser:425 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2016-12-09 10:41:54.90 host 1 configure.sh(38037) Install ConfigMaprUser:499 Give privilleges to maprdev
2016-12-09 10:41:54.127 host 1 configure.sh(38037) Install ConfigureRunUserMaprDirs:270 Config MAPR_USER for logs/conf of MapR Services
2016-12-09 10:41:54.249 host 1 configure.sh(38037) Install ConfigMaprUser:517 Update /opt/mapr/conf/daemon.conf
2016-12-09 10:41:54.274 host 1 configure.sh(38037) Install ConfigMaprUser:546 set maprdev limits in /etc/security/limits.conf
2016-12-09 10:41:55.477 host 1 configure.sh(38037) Install ConfigMaprUser:592 maprdev/maprdev user/group configured
2016-12-09 10:41:55.553 host 1 configure.sh(38037) Install UpdateFileClientConfig:1274 Updating file client config
2016-12-09 10:41:55.704 host 1 configure.sh(38037) Install ConfigureRunUserForZKRole:89 Config MAPR_USER for ZooKeeper Role
2016-12-09 10:41:55.871 host 1 configure.sh(38037) Install ConfigureWSRole:1193 Configuring Webserver
2016-12-09 10:41:55.891 host 1 configure.sh(38037) Install ConfigureJTRole:1306 Skipping Job Tracker Role configuration... Not found
2016-12-09 10:41:55.903 host 1 configure.sh(38037) Install ConfigureTTRole:1390 Skipping TaskTracker Role configuration... Not found
2016-12-09 10:41:55.915 host 1 configure.sh(38037) Install ConfigureDrillBitsRole:1408 Configuring Drill Bits Role
2016-12-09 10:41:55.951 host 1 configure.sh(38037) Install ConfigureHBMRole:1531 Skipping Hbase Master Role configuration... Not found
2016-12-09 10:41:55.964 host 1 configure.sh(38037) Install ConfigureHBRRole:1567 Configuring Hbase RS Role
2016-12-09 10:41:55.976 host 1 configure.sh(38037) Install ConfigureHBase:1440 Configuring Hbase
2016-12-09 10:41:56.50 host 1 configure.sh(38037) Install writeAsynchbaseKeyValue:1701 replace the existing value localhost of hbase.zookeeper.quorum to host 1:5181,host 2:5181,host 3:5181 in /opt/mapr/asynchbase/asynchbase-1.7.0/conf/asynchbase.conf
2016-12-09 10:41:56.98 host 1 configure.sh(38037) Install UpdateFileClientConfig:1274 Updating file client config
2016-12-09 10:41:56.120 host 1 configure.sh(38037) Install ConfigureHBIRole:1550 Configuring Hbase Client Role
2016-12-09 10:41:56.134 host 1 configure.sh(38037) Install ConfigureHBase:1440 Configuring Hbase
2016-12-09 10:41:56.205 host 1 configure.sh(38037) Install writeAsynchbaseKeyValue:1701 replace the existing value host 1:5181,host 2:5181,host 3:5181 of hbase.zookeeper.quorum to host 1:5181,host 2:5181,host 3:5181 in /opt/mapr/asynchbase/asynchbase-1.7.0/conf/asynchbase.conf
2016-12-09 10:41:56.257 host 1 configure.sh(38037) Install UpdateFileClientConfig:1274 Updating file client config
2016-12-09 10:41:56.278 host 1 configure.sh(38037) Install UpdateFileClientConfig:1274 -defaultdb input is neither mapr nor hbase, will use the default value hbase
2016-12-09 10:41:56.296 host 1 configure.sh(38037) Install ConfigureDefaultDB:1596 mapr-hbase client is installed /opt/mapr/lib/mapr-hbase-5.2.0-mapr-tests.jar
2016-12-09 10:41:56.316 host 1 configure.sh(38037) Install ConfigureDefaultDB:1619 set property mapr.hbase.default.db to value hbase
2016-12-09 10:41:56.337 host 1 configure.sh(38037) Install writeAsynchbaseKeyValue:1707 set the value of mapr.hbase.default.db to hbase in /opt/mapr/asynchbase/asynchbase-1.7.0/conf/asynchbase.conf
2016-12-09 10:41:56.350 host 1 configure.sh(38037) Install ConfigureAsyncDefaultDB:1715 Skipping Asynchbase Role configuration... Not found
2016-12-09 10:41:56.401 host 1 configure.sh(38037) Install ConfigureOozieRole:1368 Skipping Oozie Role configuration... Not found
2016-12-09 10:41:56.415 host 1 configure.sh(38037) Install ConfigureMesosRoles:1332 Skipping Mesos Roles configuration... Not found
2016-12-09 10:41:56.428 host 1 configure.sh(38037) Install ConfigureMyriad:1324 Skipping Myriad Roles configuration... Not found
2016-12-09 10:41:56.457 host 1 configure.sh(38037) Install UpdateWardenConfig:1906 Updating Warden config
2016-12-09 10:41:56.590 host 1 configure.sh(38037) Install ConfigurePackage:1788 Running config for package collectd
2016-12-09 10:42:37.750 host 1 configure.sh(38037) Install ConfigurePackage:1788 Running config for package opentsdb
2016-12-09 10:43:13.239 host 1 configure.sh(38037) Install ConfigurePackage:1788 Running config for package elasticsearch
2016-12-09 10:45:44.530 host 1 configure.sh(38037) Install ConfigurePackage:1788 Running config for package fluentd
2016-12-09 10:45:44.798 host 1 configure.sh(38037) Install ConfigurePackage:1788 Running config for package kibana
Fri Dec 9 10:45:45 EST 2016: ERROR: Failed to configure ssl for kibana
2016-12-09 10:45:45.203 host 1 configure.sh(38037) Install ConfigurePackage:1793 Warning: config for package kibana failed - rc = 2
2016-12-09 10:45:45.238 host 1 configure.sh(38037) Install RunDiskSetup:466 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2016-12-09 10:45:45.255 host 1 configure.sh(38037) Install main:3157
2016-12-09 10:45:45.267 host 1 configure.sh(38037) Install main:3158 Node install FINISHED
2016-12-09 10:45:45.279 host 1 configure.sh(38037) Install main:3159 -----------------------
2016-12-12 11:05:09.186 host 1 configure.sh(3246) Install check_valid_ip_list:2159 Using 7222 port for CLDB secure=true
2016-12-12 11:05:09.348 host 1 configure.sh(3246) Install check_valid_ip_list:2159 Using 9200 port for Elasticsearch host 1
2016-12-12 11:05:09.365 host 1 configure.sh(3246) Install check_valid_ip_list:2159 Using 9200 port for Elasticsearch host 2
2016-12-12 11:05:09.381 host 1 configure.sh(3246) Install check_valid_ip_list:2159 Using 9200 port for Elasticsearch host 3
2016-12-12 11:05:09.418 host 1 configure.sh(3246) Install check_valid_ip_list:2159 Using 4242 port for OpenTsdb host 1
2016-12-12 11:05:09.435 host 1 configure.sh(3246) Install check_valid_ip_list:2159 Using 4242 port for OpenTsdb host 2
2016-12-12 11:05:09.451 host 1 configure.sh(3246) Install check_valid_ip_list:2159 Using 4242 port for OpenTsdb host 3
2016-12-12 11:05:09.480 host 1 configure.sh(3246) Install main:3039
2016-12-12 11:05:09.493 host 1 configure.sh(3246) Install main:3040 Node install STARTED
2016-12-12 11:05:09.506 host 1 configure.sh(3246) Install main:3041 -----------------------
2016-12-12 11:05:09.519 host 1 configure.sh(3246) Install main:3042 CMD: /opt/mapr/server/configure.sh -R -ES host 1,host 2,host 3 -OT host 1,host 2,host 3
2016-12-12 11:05:09.555 host 1 configure.sh(3246) Install main:3080 Cluster run as secure=true
2016-12-12 11:05:09.585 host 1 configure.sh(3246) Install ConstructMapRMonitoringConfFile:939 Contructing MonitoringConfFile: openTsdb node list: host 1:4242 host 2:4242 host 3:4242
2016-12-12 11:05:09.608 host 1 configure.sh(3246) Install ConstructMapRMonitoringConfFile:955 Contructing MonitoringConfFile: elasticsearch node list: host 1:9200 host 2:9200 host 3:9200
2016-12-12 11:05:09.627 host 1 configure.sh(3246) Install ConstructMapRMonitoringConfFile:981 Contructing MonitoringConfFile: Done
2016-12-12 11:05:09.652 host 1 configure.sh(3246) Install ConfigMaprUser:423 MAPR_USER: maprdev MAPR_GROUP: maprdev
2016-12-12 11:05:09.664 host 1 configure.sh(3246) Install ConfigMaprUser:424 CREATE_USER:
2016-12-12 11:05:09.677 host 1 configure.sh(3246) Install ConfigMaprUser:425 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2016-12-12 11:05:09.696 host 1 configure.sh(3246) Install ConfigMaprUser:499 Give privilleges to maprdev
2016-12-12 11:05:09.738 host 1 configure.sh(3246) Install ConfigureRunUserMaprDirs:270 Config MAPR_USER for logs/conf of MapR Services
2016-12-12 11:05:09.859 host 1 configure.sh(3246) Install ConfigMaprUser:517 Update /opt/mapr/conf/daemon.conf
2016-12-12 11:05:09.884 host 1 configure.sh(3246) Install ConfigMaprUser:546 set maprdev limits in /etc/security/limits.conf
2016-12-12 11:05:11.262 host 1 configure.sh(3246) Install ConfigMaprUser:592 maprdev/maprdev user/group configured
2016-12-12 11:05:11.346 host 1 configure.sh(3246) Install UpdateFileClientConfig:1274 Updating file client config
2016-12-12 11:05:11.516 host 1 configure.sh(3246) Install ConfigureRunUserForZKRole:89 Config MAPR_USER for ZooKeeper Role
2016-12-12 11:05:11.691 host 1 configure.sh(3246) Install ConfigureWSRole:1193 Configuring Webserver
2016-12-12 11:05:11.731 host 1 configure.sh(3246) Install ConfigureJTRole:1306 Skipping Job Tracker Role configuration... Not found
2016-12-12 11:05:11.745 host 1 configure.sh(3246) Install ConfigureTTRole:1390 Skipping TaskTracker Role configuration... Not found
2016-12-12 11:05:11.758 host 1 configure.sh(3246) Install ConfigureDrillBitsRole:1408 Configuring Drill Bits Role
2016-12-12 11:05:11.793 host 1 configure.sh(3246) Install ConfigureHBMRole:1531 Skipping Hbase Master Role configuration... Not found
2016-12-12 11:05:11.806 host 1 configure.sh(3246) Install ConfigureHBRRole:1567 Configuring Hbase RS Role
2016-12-12 11:05:11.819 host 1 configure.sh(3246) Install ConfigureHBase:1440 Configuring Hbase
2016-12-12 11:05:11.896 host 1 configure.sh(3246) Install writeAsynchbaseKeyValue:1701 replace the existing value host 1:5181,host 2:5181,host 3:5181 of hbase.zookeeper.quorum to host 1:5181,host 2:5181,host 3:5181 in /opt/mapr/asynchbase/asynchbase-1.7.0/conf/asynchbase.conf
2016-12-12 11:05:11.953 host 1 configure.sh(3246) Install UpdateFileClientConfig:1274 Updating file client config
2016-12-12 11:05:11.977 host 1 configure.sh(3246) Install ConfigureHBIRole:1550 Configuring Hbase Client Role
2016-12-12 11:05:11.990 host 1 configure.sh(3246) Install ConfigureHBase:1440 Configuring Hbase
2016-12-12 11:05:12.62 host 1 configure.sh(3246) Install writeAsynchbaseKeyValue:1701 replace the existing value host 1:5181,host 2:5181,host 3:5181 of hbase.zookeeper.quorum to host 1:5181,host 2:5181,host 3:5181 in /opt/mapr/asynchbase/asynchbase-1.7.0/conf/asynchbase.conf
2016-12-12 11:05:12.115 host 1 configure.sh(3246) Install UpdateFileClientConfig:1274 Updating file client config
2016-12-12 11:05:12.135 host 1 configure.sh(3246) Install UpdateFileClientConfig:1274 -defaultdb input is neither mapr nor hbase, will use the default value hbase
2016-12-12 11:05:12.152 host 1 configure.sh(3246) Install ConfigureDefaultDB:1596 mapr-hbase client is installed /opt/mapr/lib/mapr-hbase-5.2.0-mapr-tests.jar
2016-12-12 11:05:12.171 host 1 configure.sh(3246) Install ConfigureDefaultDB:1619 set property mapr.hbase.default.db to value hbase
2016-12-12 11:05:12.191 host 1 configure.sh(3246) Install writeAsynchbaseKeyValue:1701 replace the existing value hbase of mapr.hbase.default.db to hbase in /opt/mapr/asynchbase/asynchbase-1.7.0/conf/asynchbase.conf
2016-12-12 11:05:12.207 host 1 configure.sh(3246) Install ConfigureAsyncDefaultDB:1715 Skipping Asynchbase Role configuration... Not found
2016-12-12 11:05:12.266 host 1 configure.sh(3246) Install ConfigureOozieRole:1368 Skipping Oozie Role configuration... Not found
2016-12-12 11:05:12.280 host 1 configure.sh(3246) Install ConfigureMesosRoles:1332 Skipping Mesos Roles configuration... Not found
2016-12-12 11:05:12.294 host 1 configure.sh(3246) Install ConfigureMyriad:1324 Skipping Myriad Roles configuration... Not found
2016-12-12 11:05:12.325 host 1 configure.sh(3246) Install UpdateWardenConfig:1906 Updating Warden config
2016-12-12 11:05:12.463 host 1 configure.sh(3246) Install ConfigurePackage:1788 Running config for package collectd
2016-12-12 11:05:22.496 host 1 configure.sh(3246) Install ConfigurePackage:1788 Running config for package opentsdb
2016-12-12 11:05:54.93 host 1 configure.sh(3246) Install ConfigurePackage:1788 Running config for package elasticsearch
2016-12-12 11:07:24.733 host 1 configure.sh(3246) Install ConfigurePackage:1788 Running config for package fluentd
2016-12-12 11:07:25.104 host 1 configure.sh(3246) Install ConfigurePackage:1788 Running config for package kibana
Mon Dec 12 11:07:25 EST 2016: ERROR: Failed to configure ssl for kibana
2016-12-12 11:07:25.554 host 1 configure.sh(3246) Install ConfigurePackage:1793 Warning: config for package kibana failed - rc = 2
2016-12-12 11:07:25.593 host 1 configure.sh(3246) Install RunDiskSetup:466 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2016-12-12 11:07:25.611 host 1 configure.sh(3246) Install main:3157
2016-12-12 11:07:25.624 host 1 configure.sh(3246) Install main:3158 Node install FINISHED
2016-12-12 11:07:25.637 host 1 configure.sh(3246) Install main:3159 -----------------------
2016-12-12 11:10:26.584 host 1 configure.sh(27174) Install check_valid_ip_list:2159 Using 7222 port for CLDB secure=true
2016-12-12 11:10:26.725 host 1 configure.sh(27174) Install check_valid_ip_list:2159 Using 9200 port for Elasticsearch host 1
2016-12-12 11:10:26.742 host 1 configure.sh(27174) Install check_valid_ip_list:2159 Using 9200 port for Elasticsearch host 2
2016-12-12 11:10:26.759 host 1 configure.sh(27174) Install check_valid_ip_list:2159 Using 9200 port for Elasticsearch host 3
2016-12-12 11:10:26.795 host 1 configure.sh(27174) Install check_valid_ip_list:2159 Using 4242 port for OpenTsdb host 1
2016-12-12 11:10:26.812 host 1 configure.sh(27174) Install check_valid_ip_list:2159 Using 4242 port for OpenTsdb host 2
2016-12-12 11:10:26.828 host 1 configure.sh(27174) Install check_valid_ip_list:2159 Using 4242 port for OpenTsdb host 3
2016-12-12 11:10:26.858 host 1 configure.sh(27174) Install main:3039
2016-12-12 11:10:26.871 host 1 configure.sh(27174) Install main:3040 Node install STARTED
2016-12-12 11:10:26.884 host 1 configure.sh(27174) Install main:3041 -----------------------
2016-12-12 11:10:26.897 host 1 configure.sh(27174) Install main:3042 CMD: /opt/mapr/server/configure.sh -R -ES host 1,host 2,host 3 -OT host 1,host 2,host 3
2016-12-12 11:10:26.933 host 1 configure.sh(27174) Install main:3080 Cluster run as secure=true
2016-12-12 11:10:26.957 host 1 configure.sh(27174) Install ConstructMapRMonitoringConfFile:939 Contructing MonitoringConfFile: openTsdb node list: host 1:4242 host 2:4242 host 3:4242
2016-12-12 11:10:26.980 host 1 configure.sh(27174) Install ConstructMapRMonitoringConfFile:955 Contructing MonitoringConfFile: elasticsearch node list: host 1:9200 host 2:9200 host 3:9200
2016-12-12 11:10:27.999 host 1 configure.sh(27174) Install ConstructMapRMonitoringConfFile:981 Contructing MonitoringConfFile: Done
2016-12-12 11:10:27.21 host 1 configure.sh(27174) Install ConfigMaprUser:423 MAPR_USER: maprdev MAPR_GROUP: maprdev
2016-12-12 11:10:27.34 host 1 configure.sh(27174) Install ConfigMaprUser:424 CREATE_USER:
2016-12-12 11:10:27.46 host 1 configure.sh(27174) Install ConfigMaprUser:425 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2016-12-12 11:10:27.65 host 1 configure.sh(27174) Install ConfigMaprUser:499 Give privilleges to maprdev
2016-12-12 11:10:27.104 host 1 configure.sh(27174) Install ConfigureRunUserMaprDirs:270 Config MAPR_USER for logs/conf of MapR Services
2016-12-12 11:10:27.223 host 1 configure.sh(27174) Install ConfigMaprUser:517 Update /opt/mapr/conf/daemon.conf
2016-12-12 11:10:27.248 host 1 configure.sh(27174) Install ConfigMaprUser:546 set maprdev limits in /etc/security/limits.conf
2016-12-12 11:10:28.459 host 1 configure.sh(27174) Install ConfigMaprUser:592 maprdev/maprdev user/group configured
2016-12-12 11:10:28.534 host 1 configure.sh(27174) Install UpdateFileClientConfig:1274 Updating file client config
2016-12-12 11:10:28.693 host 1 configure.sh(27174) Install ConfigureRunUserForZKRole:89 Config MAPR_USER for ZooKeeper Role
2016-12-12 11:10:28.855 host 1 configure.sh(27174) Install ConfigureWSRole:1193 Configuring Webserver
2016-12-12 11:10:28.875 host 1 configure.sh(27174) Install ConfigureJTRole:1306 Skipping Job Tracker Role configuration... Not found
2016-12-12 11:10:28.889 host 1 configure.sh(27174) Install ConfigureTTRole:1390 Skipping TaskTracker Role configuration... Not found
2016-12-12 11:10:28.902 host 1 configure.sh(27174) Install ConfigureDrillBitsRole:1408 Configuring Drill Bits Role
2016-12-12 11:10:28.934 host 1 configure.sh(27174) Install ConfigureHBMRole:1531 Skipping Hbase Master Role configuration... Not found
2016-12-12 11:10:28.948 host 1 configure.sh(27174) Install ConfigureHBRRole:1567 Configuring Hbase RS Role
2016-12-12 11:10:28.961 host 1 configure.sh(27174) Install ConfigureHBase:1440 Configuring Hbase
2016-12-12 11:10:29.36 host 1 configure.sh(27174) Install writeAsynchbaseKeyValue:1701 replace the existing value host 1:5181,host 2:5181,host 3:5181 of hbase.zookeeper.quorum to host 1:5181,host 2:5181,host 3:5181 in /opt/mapr/asynchbase/asynchbase-1.7.0/conf/asynchbase.conf
2016-12-12 11:10:29.86 host 1 configure.sh(27174) Install UpdateFileClientConfig:1274 Updating file client config
2016-12-12 11:10:29.109 host 1 configure.sh(27174) Install ConfigureHBIRole:1550 Configuring Hbase Client Role
2016-12-12 11:10:29.123 host 1 configure.sh(27174) Install ConfigureHBase:1440 Configuring Hbase
2016-12-12 11:10:29.195 host 1 configure.sh(27174) Install writeAsynchbaseKeyValue:1701 replace the existing value host 1:5181,host 2:5181,host 3:5181 of hbase.zookeeper.quorum to host 1:5181,host 2:5181,host 3:5181 in /opt/mapr/asynchbase/asynchbase-1.7.0/conf/asynchbase.conf
2016-12-12 11:10:29.246 host 1 configure.sh(27174) Install UpdateFileClientConfig:1274 Updating file client config
2016-12-12 11:10:29.267 host 1 configure.sh(27174) Install UpdateFileClientConfig:1274 -defaultdb input is neither mapr nor hbase, will use the default value hbase
2016-12-12 11:10:29.285 host 1 configure.sh(27174) Install ConfigureDefaultDB:1596 mapr-hbase client is installed /opt/mapr/lib/mapr-hbase-5.2.0-mapr-tests.jar
2016-12-12 11:10:29.304 host 1 configure.sh(27174) Install ConfigureDefaultDB:1619 set property mapr.hbase.default.db to value hbase
2016-12-12 11:10:29.325 host 1 configure.sh(27174) Install writeAsynchbaseKeyValue:1701 replace the existing value hbase of mapr.hbase.default.db to hbase in /opt/mapr/asynchbase/asynchbase-1.7.0/conf/asynchbase.conf
2016-12-12 11:10:29.342 host 1 configure.sh(27174) Install ConfigureAsyncDefaultDB:1715 Skipping Asynchbase Role configuration... Not found
2016-12-12 11:10:29.392 host 1 configure.sh(27174) Install ConfigureOozieRole:1368 Skipping Oozie Role configuration... Not found
2016-12-12 11:10:29.406 host 1 configure.sh(27174) Install ConfigureMesosRoles:1332 Skipping Mesos Roles configuration... Not found
2016-12-12 11:10:29.419 host 1 configure.sh(27174) Install ConfigureMyriad:1324 Skipping Myriad Roles configuration... Not found
2016-12-12 11:10:29.449 host 1 configure.sh(27174) Install UpdateWardenConfig:1906 Updating Warden config
2016-12-12 11:10:29.575 host 1 configure.sh(27174) Install ConfigurePackage:1788 Running config for package collectd
2016-12-12 11:10:39.730 host 1 configure.sh(27174) Install ConfigurePackage:1788 Running config for package opentsdb
2016-12-12 11:11:09.691 host 1 configure.sh(27174) Install ConfigurePackage:1788 Running config for package elasticsearch
2016-12-12 11:12:40.252 host 1 configure.sh(27174) Install ConfigurePackage:1788 Running config for package fluentd
2016-12-12 11:12:40.492 host 1 configure.sh(27174) Install ConfigurePackage:1788 Running config for package kibana
Mon Dec 12 11:12:40 EST 2016: ERROR: Failed to configure ssl for kibana
2016-12-12 11:12:40.868 host 1 configure.sh(27174) Install ConfigurePackage:1793 Warning: config for package kibana failed - rc = 2
2016-12-12 11:12:40.907 host 1 configure.sh(27174) Install RunDiskSetup:466 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2016-12-12 11:12:40.924 host 1 configure.sh(27174) Install main:3157
2016-12-12 11:12:40.938 host 1 configure.sh(27174) Install main:3158 Node install FINISHED
2016-12-12 11:12:40.952 host 1 configure.sh(27174) Install main:3159 -----------------------
2016-12-13 11:07:23.807 host 1 configure.sh(26995) Install check_valid_ip_list:2159 Using 7222 port for CLDB secure=true
2016-12-13 11:07:23.953 host 1 configure.sh(26995) Install check_valid_ip_list:2159 Using 9200 port for Elasticsearch host 1
2016-12-13 11:07:23.969 host 1 configure.sh(26995) Install check_valid_ip_list:2159 Using 9200 port for Elasticsearch host 2
2016-12-13 11:07:23.986 host 1 configure.sh(26995) Install check_valid_ip_list:2159 Using 9200 port for Elasticsearch host 3
2016-12-13 11:07:24.23 host 1 configure.sh(26995) Install check_valid_ip_list:2159 Using 4242 port for OpenTsdb host 1
2016-12-13 11:07:24.39 host 1 configure.sh(26995) Install check_valid_ip_list:2159 Using 4242 port for OpenTsdb host 2
2016-12-13 11:07:24.56 host 1 configure.sh(26995) Install check_valid_ip_list:2159 Using 4242 port for OpenTsdb host 3
2016-12-13 11:07:24.86 host 1 configure.sh(26995) Install main:3039
2016-12-13 11:07:24.99 host 1 configure.sh(26995) Install main:3040 Node install STARTED
2016-12-13 11:07:24.112 host 1 configure.sh(26995) Install main:3041 -----------------------
2016-12-13 11:07:24.125 host 1 configure.sh(26995) Install main:3042 CMD: /opt/mapr/server/configure.sh -R -ES host 1,host 2,host 3 -OT host 1,host 2,host 3
2016-12-13 11:07:24.161 host 1 configure.sh(26995) Install main:3080 Cluster run as secure=true
2016-12-13 11:07:24.185 host 1 configure.sh(26995) Install ConstructMapRMonitoringConfFile:939 Contructing MonitoringConfFile: openTsdb node list: host 1:4242 host 2:4242 host 3:4242
2016-12-13 11:07:24.208 host 1 configure.sh(26995) Install ConstructMapRMonitoringConfFile:955 Contructing MonitoringConfFile: elasticsearch node list: host 1:9200 host 2:9200 host 3:9200
2016-12-13 11:07:24.227 host 1 configure.sh(26995) Install ConstructMapRMonitoringConfFile:981 Contructing MonitoringConfFile: Done
2016-12-13 11:07:24.250 host 1 configure.sh(26995) Install ConfigMaprUser:423 MAPR_USER: maprdev MAPR_GROUP: maprdev
2016-12-13 11:07:24.262 host 1 configure.sh(26995) Install ConfigMaprUser:424 CREATE_USER:
2016-12-13 11:07:24.275 host 1 configure.sh(26995) Install ConfigMaprUser:425 maprUserId: maprGroupId:
uid=1710(maprdev) gid=1710(maprdev) groups=1710(maprdev),6221(shadow)
2016-12-13 11:07:24.294 host 1 configure.sh(26995) Install ConfigMaprUser:499 Give privilleges to maprdev
2016-12-13 11:07:24.333 host 1 configure.sh(26995) Install ConfigureRunUserMaprDirs:270 Config MAPR_USER for logs/conf of MapR Services
2016-12-13 11:07:24.452 host 1 configure.sh(26995) Install ConfigMaprUser:517 Update /opt/mapr/conf/daemon.conf
2016-12-13 11:07:24.477 host 1 configure.sh(26995) Install ConfigMaprUser:546 set maprdev limits in /etc/security/limits.conf
2016-12-13 11:07:25.850 host 1 configure.sh(26995) Install ConfigMaprUser:592 maprdev/maprdev user/group configured
2016-12-13 11:07:25.940 host 1 configure.sh(26995) Install UpdateFileClientConfig:1274 Updating file client config
2016-12-13 11:07:26.121 host 1 configure.sh(26995) Install ConfigureRunUserForZKRole:89 Config MAPR_USER for ZooKeeper Role
2016-12-13 11:07:26.295 host 1 configure.sh(26995) Install ConfigureWSRole:1193 Configuring Webserver
2016-12-13 11:07:26.315 host 1 configure.sh(26995) Install ConfigureJTRole:1306 Skipping Job Tracker Role configuration... Not found
2016-12-13 11:07:26.327 host 1 configure.sh(26995) Install ConfigureTTRole:1390 Skipping TaskTracker Role configuration... Not found
2016-12-13 11:07:26.340 host 1 configure.sh(26995) Install ConfigureDrillBitsRole:1408 Configuring Drill Bits Role
2016-12-13 11:07:26.378 host 1 configure.sh(26995) Install ConfigureHBMRole:1531 Skipping Hbase Master Role configuration... Not found
2016-12-13 11:07:26.391 host 1 configure.sh(26995) Install ConfigureHBRRole:1567 Configuring Hbase RS Role
2016-12-13 11:07:26.404 host 1 configure.sh(26995) Install ConfigureHBase:1440 Configuring Hbase
2016-12-13 11:07:26.485 host 1 configure.sh(26995) Install writeAsynchbaseKeyValue:1701 replace the existing value host 1:5181,host 2:5181,host 3:5181 of hbase.zookeeper.quorum to host 1:5181,host 2:5181,host 3:5181 in /opt/mapr/asynchbase/asynchbase-1.7.0/conf/asynchbase.conf
2016-12-13 11:07:26.538 host 1 configure.sh(26995) Install UpdateFileClientConfig:1274 Updating file client config
2016-12-13 11:07:26.562 host 1 configure.sh(26995) Install ConfigureHBIRole:1550 Configuring Hbase Client Role
2016-12-13 11:07:26.575 host 1 configure.sh(26995) Install ConfigureHBase:1440 Configuring Hbase
2016-12-13 11:07:26.655 host 1 configure.sh(26995) Install writeAsynchbaseKeyValue:1701 replace the existing value host 1:5181,host 2:5181,host 3:5181 of hbase.zookeeper.quorum to host 1:5181,host 2:5181,host 3:5181 in /opt/mapr/asynchbase/asynchbase-1.7.0/conf/asynchbase.conf
2016-12-13 11:07:26.707 host 1 configure.sh(26995) Install UpdateFileClientConfig:1274 Updating file client config
2016-12-13 11:07:26.728 host 1 configure.sh(26995) Install UpdateFileClientConfig:1274 -defaultdb input is neither mapr nor hbase, will use the default value hbase
2016-12-13 11:07:26.747 host 1 configure.sh(26995) Install ConfigureDefaultDB:1596 mapr-hbase client is installed /opt/mapr/lib/mapr-hbase-5.2.0-mapr-tests.jar
2016-12-13 11:07:26.767 host 1 configure.sh(26995) Install ConfigureDefaultDB:1619 set property mapr.hbase.default.db to value hbase
2016-12-13 11:07:26.788 host 1 configure.sh(26995) Install writeAsynchbaseKeyValue:1701 replace the existing value hbase of mapr.hbase.default.db to hbase in /opt/mapr/asynchbase/asynchbase-1.7.0/conf/asynchbase.conf
2016-12-13 11:07:26.805 host 1 configure.sh(26995) Install ConfigureAsyncDefaultDB:1715 Skipping Asynchbase Role configuration... Not found
2016-12-13 11:07:26.857 host 1 configure.sh(26995) Install ConfigureOozieRole:1368 Skipping Oozie Role configuration... Not found
2016-12-13 11:07:26.871 host 1 configure.sh(26995) Install ConfigureMesosRoles:1332 Skipping Mesos Roles configuration... Not found
2016-12-13 11:07:26.884 host 1 configure.sh(26995) Install ConfigureMyriad:1324 Skipping Myriad Roles configuration... Not found
2016-12-13 11:07:26.914 host 1 configure.sh(26995) Install UpdateWardenConfig:1906 Updating Warden config
2016-12-13 11:07:27.41 host 1 configure.sh(26995) Install ConfigurePackage:1788 Running config for package collectd
2016-12-13 11:07:37.171 host 1 configure.sh(26995) Install ConfigurePackage:1788 Running config for package opentsdb
2016-12-13 11:08:08.999 host 1 configure.sh(26995) Install ConfigurePackage:1788 Running config for package elasticsearch
2016-12-13 11:08:08.425 host 1 configure.sh(26995) Install ConfigurePackage:1788 Running config for package fluentd
2016-12-13 11:08:08.773 host 1 configure.sh(26995) Install ConfigurePackage:1788 Running config for package kibana
Tue Dec 13 11:08:09 EST 2016: ERROR: Failed to configure ssl for kibana
2016-12-13 11:08:09.174 host 1 configure.sh(26995) Install ConfigurePackage:1793 Warning: config for package kibana failed - rc = 2
2016-12-13 11:08:09.211 host 1 configure.sh(26995) Install RunDiskSetup:466 Disksetup NOT run (-F or -D options not provided). Please run /opt/mapr/server/disksetup manually
2016-12-13 11:08:09.229 host 1 configure.sh(26995) Install main:3157
2016-12-13 11:08:09.243 host 1 configure.sh(26995) Install main:3158 Node install FINISHED
2016-12-13 11:08:09.256 host 1 configure.sh(26995) Install main:3159 -----------------------

Outcomes